The ThermoFisher Scientific Nicolet 6700 FT-IR Spectrometer is a fully upgradeable FT-IR spectrometer for routine and advanced research applications, designed for performance and flexibility. It can handle both research and routine analysis experiments. Every aspect of this spectrometer is designed to facilitate sample handling, provide options for integration into laboratory environments, and increase laboratory throughput. With an extensive global installed base, a superior service team, and a variety of possible applications, the Nicolet 6700 represents an excellent laboratory investment, both for the present and the future. It sets the industry standard in performance and sampling options, making it a strong addition to any laboratory. Base systems are optimized for mid-IR performance, and many options offer excellent performance from far-IR to near-IR and visible. The Nicolet 6700 has extensive capabilities to manage optical filters, polarizers and mirrors for specific applications through the OMNIC software suite. It can perform time-based studies, rapid scans and measurements at low light levels through the proper selection of components, enabling a wide range of application-oriented solutions. This FT-IR has the XT-KBR beamsplitter installed (11000-375cm-1). The TGA interface/module is equipped with a built-in, temperature-controlled flow cell and must be connected to a thermogravimetric analysis (TGA) oven. One can analyze the gases produced during TGA experiments using the OMNIC Series software. The TGA interface is usually mounted in the sample compartment of an AEM; The TGA module is usually installed on the side of the spectrometer, leaving the AEM or spectrometer sample compartment free for other experiments and accessories. Features include:. - An ETC EverGlo source for long life. - A dynamic alignment that ensures exceptionally high-resolution line shapes. - A USB 2. 0 interface. - Fixed components that ensure stability and can be replaced by the user. - Full integration with OMNIC software, allowing the user to focus on their studies. - Configurable for multiple spectral ranges (Far-IR to UV-Vis). - Five external beam options. - A wide range of detectors. The Golden Gate has proven to be the world's most robust and versatile accessory for single crystal diamond ATR analysis in extreme conditions. It is the only diamond ATR accessory precisely designed and engineered to operate at cryogenic temperatures up to -150°C and at elevated temperatures up to 300°C, with the added feature of supercritical fluid pressures up to 6000 psi using the appropriate top plates. The standard version comes with a 2 x 2mm 45 degree single crystal Type IIIa diamond soldered into a tungsten carbide holder. The optical path directs the energy into an active sample area with a diameter of 0.60 mm. The accessories include a novel swing bridge with a mounted sapphire vil for controllable and reproducible high-pressure contact up to 180 lbs. The Anvil has a clear working distance of 6mm for macro samples and is mounted in a non-rotating clamp to avoid sample shearing and heating due to friction. ZnSe is provided as a standard infrared transmissive focusing element, with KRS-5 available for extended spectral performance Labprocure is responsible for this device.