A Thermo Heraeus VT6130M-BL vacuum drying oven, which is in very good condition and suitable for flammable solvents, has a Vacuucenter and a chemical-resistant vacuum pump. It is ideal for gentle and rapid drying and heat treatment of temperature-sensitive materials and components from the areas of electronics, pharmaceuticals, cosmetics, biochemistry, etc. The rectangular inner housing is particularly noteworthy. The usable space is made of electropolished and internally welded stainless steel 1. 4571. It also has a vacuum-tight silicone seal. Further features include an analog pressure display, a stainless steel ball valve, a quick exhaust valve and an inert gas connection with an overpressure safety valve for the metered supply of process gas. The door construction with a large window made of double safety glass offers additional protection against implosion and heat. The vacuum fittings are protected against corrosion and there is a small flange (DN 25 KF) on the back of the cabinet. As standard it is equipped with a temperature selection switch, protection class 2, and with 2 or 3 inserts. The M model is jacket-heated and can be heated up to 200°C. The heat is transported from the heated heat container via the insert plates to the goods. The insert plates are removable. The temperature controller is microprocessor controlled by Kelvitron®. The external dimensions (W x D x H) are 895 x 750 x 720 mm and the internal dimensions are 495 x 529 x 489 mm. It is operated with 230V, 50/60Hz. The working area width is 495 mm and contains 3 gratings. The maximum slot capacity is 5. The nominal power is 2.2 kW and the nominal volume is 128 l. The net weight is 153 kg and the working depth is 529 mm. The maximum operating temperature is 200°C and the minimum is 35°C. There is no natural convection or circulating air. Labprocure is responsible for this device.