Tecan RMP 150/8
Objektnummer | B00010955 |
---|---|
ID-number | 010955 |
Object name | Tecan RMP 150/8 |
Status | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, paymet by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representating the delivery volume. The exact delivery content you will find only in the offering text.
Introduction
GENESIS RMP Overview
The GENESIS RMP is a Robotic Microplate Processor for ELISA (Enzyme Linked Immuno Sorbent Assay) and ELISA-like tests. lt is produced in three sizes (instrument width: 100, 150 and 200 cm respectively). lt is equipped with a Robotic Manipulator Arm (RoMa) and a Liquid Handling Arm (LiHa) with 4 or 8 tips. Furthermore, the GENESIS RMP contains a room temperature incubator, a heated incubator, a reader, a washer, a shelf for 4, 6, 8 or 12 microplates and a barcode reader (PosID). The access door is secured with doorlocks (see figure 1-1). Optional, the instrument can be equipped with a second room temperature incubator and/or heated incubator.
The GENESIS RMP is operated via the Test Oriented Plate Scheduler (TOPS) Run Control software.
Intended Use
The GENESIS RMP (Robotic Microplate Processor) is intended for fully automated processing of 96-well microplate based ELISA (Enzyme Linked Immuno Sorbent Assay) and ELISA-like tests, starting from sample pipetting and ending with result reading.
The user is responsible for correctly applying the GENESIS RMP, according to all local, state and federal laws that may apply. All precautions must be followed to ensure safe Operation of the instrument.
Instrument specifications
Genesis RMP Overall Dimensions
Worktable Dimensions
X-range RMP 100 |
550 mm (21.6") 24 grids |
X-range RMP 150 |
925 mm (36.4") 39 grids |
X-range RMP 200 |
1525 mm (60.0") 63 grids |
Y -range |
418 mm (16.5") total range from first to last tip 364 mm (14.35") common range for all tips (4 tip arm) 292 mm (11.5") common for all tips (8 tip arm) |
Z-range |
165 mm (6.5") with standard tip 185 mm (7.3") with DiTi 200 µl 150 mm (5.9") with DiTi 1000 µI |
Weight
RMP 100 with PoslD |
166 kg (365 Ib) |
RMP 150 with PoslD |
188 kg (414,4 Ib) |
RMP 200 with PoslD |
241 kg (531,3 Ib) |
Supply Connections
Primary Voltage |
100-240 VAC |
Secondary Voltage |
24 VDC |
Line Frequency |
50 - 60 Hz |
Power |
1000 VA |
Ground Line |
Must be connected |
Circuit Breaker |
10 A |
Voltage Fluctuation |
+ 10% and - 15% |
Overvoltage Category |
Class 2 |
Environmental Conditions
Storage Temperature |
1° - 60° C (34° - 140°F) |
Storage Humidity |
5 - 80 % relative humidity at + 30° C (86° F) |
Operation Temperature |
18° - 30° C (65° - 86° F) |
Operation Humidity |
30 - 80% relative humidity at + 30° C (86° F) (non condensing) |
Operational Height |
Operation allowed up to 2500 m (8202 ft.) above sea level |
Pollution Degree |
2 |
Use |
Indoor use only |
Emissions
Noise
Maximum 70 dBA (1 m)
Modules
Liquid System
Volumes
Volumes in the range from 3 µl to 5000 µl (depending on syringe size) can be pipetted with standard tips and 3 to 1000 µl with disposable tips.
Liquid Detection
Less than 50 µl of conductive liquid in round-bottom microplates can be detected.
Precision
Precision in single pipetting mode with de-ionized water:
Volume |
Tip |
Precision |
10 µl |
Standard, DiT1 200 |
CV < 3% |
100 µl |
Standard, DiTi 200, DiTi 1000 |
CV < 0.5% |
Carryover
Carryover is prevented best if disposable tips with filter are used. With stainless steel Teflon coated tips and use of the Monitored Pump Option (MPO), carryover of less than 10 -6 can be achieved.
Diluter
Resolution |
3000 steps per syringe stroke |
Plunger Speed |
1.2 sec/stroke to 10 min./stroke |
Syringe Size 250 pl - 5.0 ml |
250 µl - 5.0 ml |
Plunger Travel Lenght |
30 mm |
Incubator
Temperature Range |
Room temperature +5° .... 50°C (+41°F .... 125°F) or 50.1°C .... 60°C (122.2°F .... 140°C) |
Temperature Setting Steps |
0.1° C (0.1° F) |
Accuracy of Slot temperature |
0.5° C at 37° C (0.5° F at 98.6° F) |
Gradient over Microplate |
0.5° C |
Shaking Frequency Range |
1 .... 8.2 Hz (8.2 Hz is default) |
Amplitude |
1 mm |
Frequency Setting Steps |
0.1 Hz |
Supply Voltage Range |
24 V ....26.4 VDC |
PosID
Laser Class |
Class 2 |
Power |
0.95 mW max. |
Wave Length |
670 nm |
Readable Barcode Types |
Code 39 (length 0...32) Code 39 full ASCII Codabar (length 0...32) Code 128 (length 0...32) 2/5 Interleaved (length 0...30, even only) UPC-A (length not setable: 12) UPC-E (length not setable: 8) EAN-8 (length not setable: 8) EAN13 (length not setable: 13) |