Tecan Columbus Pro
Objektnummer | B00019283 |
---|---|
ID-number | 019283 |
Object name | Tecan Columbus Pro |
Status | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, paymet by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
model
:
annotation : Dokumente engl .
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
Instrument Specifications
Note:
Instrument specifications have been defined using Greiner F flat-bottom compact 96-well microplates and may vary using other 96-well flat bottom plates or 96-well strip-plates .
The table below lists the physical specifications for the Instrument. All specifications listed below are based on the following Instrument settings:
Dispensing speed: from 1 - 5 (standard setting is 3)
Aspirating rate: from 1 - 5 (standard setting is 3)
PARAMETERS CHARACTERISTICS
---------------------------------------------------------------------------------------------------------------------------
General
Display unit Liquid Crystal Display with two rows of sixteen digits
Keyboard Four key membrane keyboard
Number of dispensing channels Up to four channels
Manifold types 8, 12 or 16 way or 384-well Manifold
Variable
Volume of solution 50 - 3000 µl in 50 µl steps for washing
dispensed (50 - 400 µl if 'Dispense rate: drip" is selected)
50 - 400 µl in 50 µl steps for dispensing
For the 384-well Manifold:
10 - 120 µl in 10 µl steps for dispensing.
Dispensing accuracy CV: <= 4% over the plate
(300 µl dispensing volume, dispensing rate: 3).
This is also for the 384-well Manifold.
Residual volume Crosswise aspiration: <=2 µl per well
single aspiration - cell wash manifold: <= 5 µl per well
(Asp. rate 5, Asp. time 4 sec., Asp. speed 10mm/sec)
For the 384-well Manifold:
Crosswise aspiration: <=2 µl per well
(Asp. rate 5, Asp. time 4 sec., Asp. speed l0 mm/sec)
Interface All connected devices must be approved and listed as
per EN 60950, UL 1950, or CSA C22.2 No. 950 for Data Processing Devices.
Serial RS 232 C 9600 Baud (fixed)
Power
Supply Auto sensing for the settings
100 - 120 V or 220 - 240 V, 50/60 Hz
Consumption < 65 VA
Physical
Outside dimensions Width: 28 ,5 cm, Depth: 39,5 cm, Height: 22,0 cm
Weight 8.2 kg
Environmental
Ambient temperature
Operation 15°C to 35°C (59°F to 95°F)
Non-operation -10°C to 43°C (14°F to 109°F)
Storage -40°C to 70°C (-40°F to 158°F)
Relative Humidity
Operation 20 % to 90 % non condensing
Non-operation 5 % to 95 %
Storage 5 % to 95 %
Others
Overvoltage category II
Pollution degree 2 (IEC/EN 61010-1)
Method of disposal Contaminated waste
Linear Shaking
Mode Shaking Speed
---------------------------------------------------------------------------------------------------------------------------
1 2 3
---------------------------------------------------------------------------------------------------------------------------
Low 1.2 mm 4 Hz 7.5 Hz 11.0 Hz
Normal 1.7 mm 2 Hz 5.0 Hz 8.0 Hz
High 2.6 mm 2 Hz 3.5 Hz 5.0 Hz
The instruments adhere to applicable safety standards to date.