Sorvall RMC 14
| Objektnummer | B00010223 |
|---|---|
| ID-number | 010223 |
| Object name | Sorvall RMC 14 |
| Status | Stock unit |
Product group: Cooling centrifuges
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
|
Country |
Possible payment methods |
Comment |
|
DE, AT, CH |
Payment by invoice, payment in advance, paymet by credit card |
Payment by invoice is only possible for corporate clients. |
|
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
|
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
|
Status |
Condition |
Comment |
|
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
| In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
|
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
|
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
|
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |

|
1 |
FAULT Indicator |
When Iit, indicates that a rotor imbalance or a temperature fault has occurred and the run was terminated. |
|
2 |
SPEED Display |
Indicates actual rotor speed from 0 to 14 200 rpm. |
|
3 |
TIME Display |
Indicates set run time and, during a run, the remaining run time in minutes. Blinking 8's are an indication that the motor has overheated. To reset the centrifuge, tum the power switch off and back an again. |
|
4 |
TEMP°C Display |
Displays the actual chamber temperature from -20°C to +40°C. |
|
5 |
DOOR Indicator |
Blinks at the end of a run, indicating that the rotor has stopped spinning and you may open the chamber door. |
|
6 |
PULSE Button |
Starts a momentary run that accelerates to 14 200 rpm. The timer counts up in seconds. To end the run, release the switch. |
|
7 |
DOOR Switch |
Opens the chamber door. |
|
8 |
START Switch |
Initiates the centrifuge run. |
|
9 |
Stop Switch |
Terminates the centrifuge run. |
|
10 |
TEMP°C Dial |
Sets the desired chamber temperature from -20°C to +40°C. |
|
11 |
TIME Dial |
Sets the length of the run, up to 99 minutes. Tum the dial to the right to increase the length of the run. |
|
12 |
SPEED Dial |
Set the desired rotor speed in rpm. |
|
|
POWER Switch |
A switch (not shown) Iocated an the rear of the right side panel. When set to ON, applies power to the centrifuge. |
Dimensions Width: 30 cm
Depth: 61 cm
Height: 33 cm; 54 cm with door open
Weight 35 kg
Noise Level < 60 dB (The maximum noise output with the centrifuge running at maximum speed, measured 3 feet from the front panel at an approximated operator height)