Sigma 1-6P
| Objektnummer | B00006622 |
|---|---|
| ID-number | 006622 |
| Object name | Sigma 1-6P |
| Status | Stock unit |
Product group: Centrifuges (various)
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
|
Country |
Possible payment methods |
Comment |
|
DE, AT, CH |
Payment by invoice, payment in advance, paymet by credit card |
Payment by invoice is only possible for corporate clients. |
|
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
|
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
|
Status |
Condition |
Comment |
|
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
| In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
|
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
|
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
|
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
manufacturer: Hach
model: 2100 N
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
2100N Turbidimeters
With Hach’s patented optical system and 40 years of design evolution, the 2100N and 2100N IS Turbidimeters meet the needs of most laboratories for fast, accurate turbidity testing over a wide range of samples. The 2100N is equipped with a tungsten lamp, while the 2100N IS is equipped with an 860 nm LED light source.
Specifications
Measurement method
Nephelometric
Regulatory
Meets EPA Method 180.1
Light source
Tungsten lamp
Accuracy
Ratio ON: ±2% of reading plus 0.01 NTU from 0 to 1000 NTU; ±5% of reading from 1000 to 4000 NTU
Ratio OFF: ±2% of reading plus 0.01 NTU from 0 to 40 NTU (under reference conditions)
Resolution
Turbidity: 0.001 NTU/FNU/EBC, Abs on lowest range (as appropriate)
Transmittance (where available): 0.1 %T
Color (where available): 1 CU
Repeatability
± 1% of reading or ± 0.01 NTU/FNU, whichever is greater (under reference conditions)
Response time
6.8 seconds with signal averaging off; 14 seconds with signal averaging on
Operating modes
Manual or Auto range; signal average on or off; Ratio on or off
Measurement modes
NTU, EBC, NEP
Sample cells
Borosilicate glass with rubber-lined screw caps; 95 x 25 mm (3.74 x 1 in.)
Sample volume
20 ml (0.7 oz.), minimum
Operating temperature
0 to 40°C (32 to 104°F)
Sample temperature
0 to 95°C (32 to 203°F)
Storage temperature
-40 to 60°C (-40 to 140°F)
Operating humidity
non-condensing; 0 to 90%, @ 25°C; 0 to 75% @ 40°C
Instrument stabilization time
30 min. with ratio on, 60 min.
with ratio off; typical application
leaves instrument on 24 hour/day
Air Purge
0.1 scfm at 69 kPa (10 psig), dry nitrogen or instrument grade air (ANSI MC 11.1, 1975)
Air purge connection
Tubing: hose barb for 1/8-in.; Pressure: 138 kPa (20 psig) maximum
Power requirement
115/230 Vac or 230 Vac ±17%, 50/60 Hz, 60 VA maximum (Automatic Power Selection)
Input/Output
RS232C serial interface via DB9 subminiature D-shell connector for data output to computer or printer, and data input (command).
No handshaking. Baud rate 1200, one stop bit, no parity, 8-bit character length. Additional options on 2100AN and 2100AN IS.
Compliance
Listed to UL 1262 and certified to CSA 22.2 No. 1010.1 by Edison Testing Laboratories (ETL). Carries the CE compliance mark.
Enclosure
High-impact polycarbonate plastic
Dimensions
30.5 x 40 x 15.6 cm (12 x 15.8 x 6.1 in.)
Weight
3.4 kg (7.8 lb.)
