Combining the SSM-5000A with a TOC Vcs/cp analyzer enables the analysis of a wide range of solid samples as well as aqueous samples including soil, sludge and sediment. Measurement of carbon in buildup by the swab method can be performed for cleaning validation. Characteristics:. Analyzing 1 gram samples containing up to 30 mg of carbon content reduces weighing errors or errors due to uneven distribution of carbon content in the sample. The use of unique tandem measurement cells that combine a long cell for measuring aqueous samples and a short cell for solid samples allows a single TOC analyzer to handle a range from tens of ppb TOC in ultrapure water to 10% TOC in solid samples . Measuring inorganic carbon (carbonate) in solid samples is also easy. Aqueous samples with large amounts of suspended matter can be analyzed by placing the sample in a sample boat. Switching between TOC-Vcs/cp analysis of aqueous samples and SSM-5000A measurements of solid samples is achieved through simple screen settings. The SSM-5000A can be connected to a TOC Vcs/cp unit with an automatic sampler. (Automatic measurement of solid samples is not possible. ). Specifications:. Analytes: TC, IC, TOC (TC-IC). Method: . - TC: Catalytic assisted combustion oxidation at 900°C. - IC: pre-acidification, oven temperature: 250 °C. Measuring range: . - TC: 0.1 mg to 30 mg carbon. - IC: 0.1 mg to 20 mg carbon. Sample quantity: 1 gram – aqueous content < 0.5 g. Repeatability: Standard deviation ±1% of full measurement range. Analysis time: 5 to 6 minutes at a gas flow rate of 500 mL/min. Carrier gas: 99.9% O2 at 500 mL/min. Ambient temperature requirements: 5° to 35° C. Power requirements: 100-127V or 220-240V as ordered. 12A: TOC-5A: SSM-7A. 50/60Hz. Weight: approximately 30kg. This SSM-5000A solid combustion unit is in good working condition. We have specialist knowledge of analytical devices. Labprocure is responsible for this device.