The injection time for a sample with a volume of 10µL is only 40 seconds. Including rinsing the flow line after the injection, the device is ready for the next injection in approximately 2 minutes. This enables frequent, repeated, high-throughput analyzes and allows sample processing such as dilution and mixing to be carried out quickly. This versatile autosampler device not only enables rapid sample injections, but also significantly reduces the time required for sample processing, such as dilution and mixing. In addition, sample processing capacity is significantly increased as two 96-well titer plates (standard and deep-well) can be used. The repeatability of the injections, which is essential for quantitative analyses, is characterized by excellent reliability and delivers extremely reliable analytical results. Characteristics:. Sample vessels ranging from microplates to 13mL vessels are supported, which can be used in a wide range of applications, from analytical to semi-preparative. Injections are performed using precisely measured syringes, creating tight volume loops that minimize cross-contamination and have excellent repeatability. Flexibility in sample processing is achieved through dilution and reagent addition routines. Specifications:. Sample injection system:. Variable sample injection system (fixed loop injection is also possible). Adjustable injection volume range:. Standard: 1-50µL (in 1µL increments). Option: 1-400µL1, 1-2000µL2, 1-5000µL3. Sample processing capacity:. 100 (with frame S), 80 (with frame L), 192 (with MTP2 frame), 25 (with LL frame). Sample container:. 7 types, made of glass or polypropylene. Number of injections:. 1-30 times per sample (varies depending on sample). Setting the analysis time:. 0.01 - 9999.9 (in 0.01 minute increments). Needle cleaning:. The inside and outside of the needle are cleaned via the rinsing opening. Injection repeatability:. RSD: 1.0% (for shortened injection operation). RSD: 0.5% (for SIL-10A compatible injection operation). <10µL injection under specific conditions>. Operating pH range:. pH 1-10. Sample pretreatment:. Yes. Sample cooling:. Sample cooler S (60 samples), sample cooler L (50 samples). Maximum pressure:. 34.3MPa. Wetted surface material:. SUS316, Ceramic, Vespel, others. Height Weight:. Main unit: 260 (W) x 150 (D) x 280 (H) mm, 18.5kg; Syringe unit: 160 (W) x 150 (D) x 280 (H), 4kg. Power supply:. AC 100V/120V/230V, 100VA, 50/60Hz Labprocure is responsible for this device.