Specification. Improved injection precision. The SIL-10AVP injects sample volumes from 0.1 µl to 500 µl with high reproducibility and linearity with volume increases of only 0.1 µl. Your results are more reliable because the SIL-10ADVP offers outstanding precision (coefficient of variation of 0.3% for a 10 µL injection). Precise fluid control delivers samples in 6nL increments for stable performance. The SIL-10ADVP can reliably automate semi-micro LC analyzes or LC/MS analyses. Increased sample capacity. The SIL-10ADVP offers an improved sample capacity of 150 samples in 1.0mL vials. It also allows direct sampling from two 96- or 384-well titration plates (corresponding to 192 and 768 samples). Additional rack and vial options include 70 samples x 1.5 mL and 60 samples x 4.0 mL. Optional sample cooling for labile samples is also available with the same capacity of 150 samples (1.0 mL vials). No sample loss during injection and minimized sample loss. The SIL-10ADVP is designed so that the sample needle is part of the fluid path. The needle draws exactly the amount of sample needed for the injection, so no sample is wasted. The needle can be rinsed both inside and outside and before and after the injection. This design virtually eliminates any sample transfer and absorption problems. GLP/GMP compliance. Built-in validation support features help you comply with GLP/GMP regulations and increase productivity by reducing the amount of work required to perform validation tasks. A log of each module's operation is kept and can be checked on screen. Custom continuous analysis. Continuous automated analyzes are performed according to the conditions specified for each sample, including pretreatment, injection and analysis conditions. Advanced sample pretreatment enables automated derivatization, addition of internal standards, mixing and dilution for consistent, reliable results and increases productivity. Priority samples can be inserted at any time during an automated run. Cooled samples are analyzed reliably. Install the optional built-in Peltier sample cooler to maintain samples at controlled temperatures of 4-35°C. The sample cooler is ideal for cooling thermolabile biological samples. It can also prevent the evaporation of sample solvents. Labprocure is responsible for this device.