Shimadzu HIC 6A
Objektnummer | B00009480 |
---|---|
ID-number | 009480 |
Object name | Shimadzu HIC 6A |
Status | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
For deliveries to countries outside the EU, an additional fee of 70,00€ for export is charged. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by credit card, letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Modell: HIC 6A
Specification
Measuring sensitivity |
0,1 ~ 5120µScm -1 FS (adjusted with the GAIN (input attenuation) switch and the RANGE (output attenuation) switch |
|
Input attenuation (GAIN) |
3 steps of 0.1, 1, and 10µScm -1 |
|
Output attenuation (RANGE) |
10 steps of 1, 2, 4, 8 ......... 512 |
|
Noise* |
0.004µScm -1 |
|
Drift* |
0.025µScm -1 (With constant ambient temperature) |
|
Drift due to ambient temperature fluctuation* |
Less;than 0.025µScm -1 /°C |
|
Cell volume |
0.25µL |
|
Cell material |
Stainless steel (SUS316), teflon, and trifluoroethylene |
|
Pressure rating of cell |
30 kgf/cm 2 |
|
Zero point adjustment |
One-touch adjustment with the ZERO button and fine adjustment with the UP and DOWN buttons |
|
Zero point adjustment range of the ZERO button |
4000µScm -1 with the gain set at 0.1 or 1µScm -1 and 9000µScm -1 with the gain set at 10µScm -1 |
|
Precision of one-touch zero-point adjustment with the ZERO button |
±10/N% (N: Range) |
|
Response |
Three-step selection of FAST, STD and SLOW, corresponding to time constants of 0.05, 0.75, and 1.5 sec., respectively. |
|
Output for recorder |
1 mV and 10mV |
|
Output for data processor |
10mV/µScm -1 with the gain set at 0.1µScm -1 , and 1 mV/µScm -1 with the gain set at 1µScm -1 , and 0.1 mV/µScm -1 with the gain set at 10µScm -1 |
|
Liquid Pump Unit |
Flow rate control range |
0.1 ~ 9.9mL/min. (0.01 ~ 9.9mL/min. when the SCL-6B system controller is connected.) |
Flow rate stability |
±0.5% (1 ~ 5mL/min.) |
|
Column Oven Unit |
Column oven |
Dedicated to the HIC-6A |
Column oven temperature |
3° C lower than the cell temperature |
|
Preheater |
Attached as standard item |
|
Others |
Dimensions |
700W X 405D X 530H mm |
Weight |
43 kg |
|
Source Power |
AC 100/115/220/230/240V (±10%) as ordered, 0.6KVA, 50/60Hz |
|
Ambient temperature |
10 ~ 35°C |