Shimadzu's gas chromatography system offers high performance and expandability to a higher level. With our improved design and innovative technology for all of our injectors, detectors and flow controllers, we offer the same or better performance as our GC-2010, the high-end technology leader. Operation is easy thanks to the large LCD and fully digital gas control and automatic diagnostics adopted from the GC-2010 - the most advanced and easiest to use interface. You have the flexibility to use any column type for any analysis. Packed or capillary columns allow you to choose the best technique for your measurement. Fully integrated multi-valve systems are easy to use and enable optimal performance for customized SystemGC GC products. The temperature range of the column oven is from (ambient temperature + 10°C) to 400°C (with liquid CO2 gas: -50°C ~ 400°C). The dimensions are 250 (W) × 360 (H) × 175 (D) mm and the oven capacity is 15.8 liters. In the sample injection unit, the temperature can be set up to 400°C and up to three units can be installed at the same time. The carrier gas flow controller has a flow range of 0 ~ 100mL/min for packed/dual samples and keeps the column flow constant during column oven heating. For capillary split/splitless direct injections there is a pressure range of 0 ~ 970kPa. The system includes various detectors whose temperature range extends up to 400°C depending on the model and which can be adjusted in increments of 1°C. Up to four units can be installed at the same time. The Flame Ionization Detector (FID) has a temperature range of up to 400°C and a minimum detection quantity of 3pgC/s (dodecane). The thermal conductivity detector (TCD) also has a temperature range up to 400°C and a sensitivity of 40,000mV · mL/mg. In addition, there are other detectors such as the Flame Photometric Detector (FPD) and the Flame Thermion Detector (FTD), each with their own specifications and temperature ranges. Labprocure is responsible for this device.