More Information
Objektnummer	B00016971
ID-number	016971
Object name	Shimadzu 14 A
Status	Archiv

Status, terms of delivery and payment

Verification of devices

The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.

Dispatch time

The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.

As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.

Shipping methods

Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.

Delivery information

Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.

The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.

Terms of payment

We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.

Country	Possible payment methods	Comment
DE, AT, CH	Payment by invoice, payment in advance, paymet by credit card	Payment by invoice is only possible for corporate clients.
NL, BE, LU	Payment by invoice, payment in advance, payment by credit card	Payment by invoice is only possible for corporate clients
Other countries	Payment in advance, payment by credit card

Our General Terms of Sale, Delivery and Payment are valid and are available for download here.

The goods are offered subject to prior sale.

Definition of status

All articles are used articles, except an article is listed especially as a new device.

Status	Condition	Comment
Immediately available	Used	The article is fully functional and in impeccable condition. It can be shipped immediately.
In stock	Used	The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article.
Published	Used	The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery.
New device	new	The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply.
Labprocure	Used	Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen.

manufacturer : Shimadzu

model : 14A GCFI

annotation : Dokumente engl .

The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.

Installation Environment

Although the unit operates in the range of ambient temperatures of 5°C ~ 40°C and relative humidity of 5% ~ 90%, use it within the range of 10°C ~ 30°C ambient and 50 ~ 60% relative humidity for longer service life and the optimum specifications. (Operating temperature range: 5°C ~ 40°C, specified temperature range: 10°C ~ 30°C)

Installation place

The following installation area is required. Install the unit at place which is protected from vibration and direct sunlight. As high-temperature (400°C) air is exhausted from the rear of the unit, do not place combustible things around the unit.

Dimensions of installation place

External dimensions of the unit

H: Height 520mm

W: Width 400mm

D: Depth 475mm

E: Height of flow controller 70mm

A : Required space behind the unit 300mm or more

B: With option unit 76mm

C: For C-R4A Chromatopac 420mm
Weight of GC-14A main body: Approx. 40kg

Power

115/220V AC (50Hz/60Hz) and 2.0 kVA max, capacity are necessary for the power source of the unit (with no satellite oven installed).

Column oven 1.3kVA

INJ block 150VA

DET block- 300VA

TCD block 200VA

Total consumed power is calculated by totalling the power consumed by INJ, DET, column oven, and AUX blocks.

Range of source voltage ± 10%

Specified range of source voltage ± 5%

Power cable

As the maximum capacity of power exceeds 15A, power cannot be supplied from a general outlet. Accordingly, supply power from a specially-wired terminal with large capacity. Exercise caution in wiring in accordance with the functions and color of the power cable, as described below.

Specifications

Column oven

Dimensions of column compartment: 230 (W) X 140 (D) X 360 (H) mm

Length of columns to be Stainless steel column 10m X 2

accommodated : Glass column 3m X 2

Capillary column 100m X 1

Range of temperature setting: Temperature; -80~+399 1°C step

Rate of temperature rise; 0~40°C/min 0.1°C step Constant temperature hold time; 0~655 min 0.1°C step Program stages 5 stages max.

Range of temperature control (with power voltage of 100V)

Range of linear temperature 30°C/min 150°C or less

increase : 20°C/min 250°C or less

10°C/min 330°C or less

5°C/min 399°C or less

Lower-limit temperature: When INJ and DET temperature is 300°C,

room temperature + 15°C

When INJ and DET temperature is 150°C,

room temperature + 10°C

Additional cryogenic equipment is required for controlling at lower temperatures than those above.

Cooling speed: Approx. 9 min to reduce from 399°C to 100°C with

room temperature of 25°C.

Approx. 14 min for reducing from 399°C to 50°C with room

temperature of 25°C

Detector oven

Range of temperature setting: Room temperature ~ 399°C (in 1°C steps)

Control accuracy: ±0.02°C (Average)

TCD oven

Range of temperature setting: Room temperature ~ 399°C (in 1°C steps)

Control accuracy: ±0.01°C

Sample injection port unit

Range of temperature setting: Room temperature ~ 399°C

Control accuracy: ±0.1°C (Average)

Sample injection port unit (Either one of the following units is provided)

Single injection port unit: For packed glass column, combination type of glass

insert and on-column injection, 1 flow line

Dual injection port unit: For packed glass column, combination of glass insert

and on-column injection, 2 flow lines

Injection port unit for Exclusive injection port for capillary analysis

for capillary columns:

Overheat protection circuit 3 circuits

450°C-fixed independent protection circuit.
Protection circuit for which the upper- lirnit temperature can be set via key operation.
Overheat protection circuit by CPU abnormality detection

Combination of Detectors

Four detectors at maximum from among TCD, FID, ECD, FPD, and FTD can be simul-taneously installed to the detector oven of the GC main body. Two TCD detectors cannot be set simultaneously.
Only two types of detector controllers (except FTD) can be installed simultaneously to the control section of the GC. Another unit should be applied for installing three or more detector controllers, or FTD.

Product group: Gaschromatographs (FID)

We can't find products matching the selection.

Shimadzu 14 A

Questions about this product

Call-Back

Leasing