Servo Benjamin Z
Objektnummer | B00011541 |
---|---|
ID-number | 011541 |
Object name | Servo Benjamin Z |
Status | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, paymet by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: Servo
Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.
Sie geben nicht den Lieferumfang des Systems wieder.
Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.
Bestimmungsgemäße Verwendung
Die Anlage dient zur Enthärtung von Stadtwasser bzw. von Wasser vergleichbarer Qualität. Die Anlage arbeitet nach dem Prinzip des lonenaustauschverfahrens im Neutralaustausch. Als Regeneriermittel kommt Kochsalzlösung zur Anwendung.
Dabei dürfen die in den Datenblättern der einzelnen Anlagenkomponenten aufgeführten Leistungen nicht überschritten werden.
Grenzdaten:
Wassertemperatur des Rohwassers 10°C < t zul. < 40° C
Umgebungstemperatur bei Betrieb ca. 20°C
maximal zulässig 40° C
Vordruck Rohwasser 3 bar < p zul. < 8 bar
wasserschlagfrei
Elektrischer Anschluß 220 V, 50 Hz
Elektrische Versorgung und Rohwasserdruck müssen ununterbrochen zur Verfügung stehen
Das Zulaufwasser muß frei sein von Eisen, Mangan, Schwermetallen ÖI oder größeren Mengen an organischen Wasserinhaltsstoffen und Oxidationsmitteln wie Chlor, Ozon, Wasserstoffperoxid u.a.
Die Anlage ist nicht für die Trinkwasseraufbereitung geeignet.
Funktionsweise der Enthärtungsanlage
Aufgabe
Die Enthärtungsanlage entzieht dem Rohwasser Härtebildner (Calcium und Magnesium). Sie enthärtet das Wasser.
Dadurch wird der Gehalt an Härtebildner im Wasser entfernt und gleichzeitig der Gehalt an Natrium erhöht.
Funktionsweise
Das Rohwasser durchströmt die Enthärtungsanlage.
Die Enthärtungsanlage enthält ein spezielles Austauscherharz. Dieses Harz nimmt Härtebildner auf und gibt Natriumionen ab.
Die Aufnahmekapazität ist begrenzt.
Regeneration
Das Austauscherharz wird regeneriert durch Überleiten einer Natriumchloridlösung aus dem Salzlösebehälter. Die Natriumionen ersetzen die aufgenommenen Härtebildner und eluieren diese.
Die Enthärtungsanlage ist wieder aufnahmefähig. Die Regeneration erfolgt automatisch.
Die Betriebsdauer zwischen zwei Regenerationen ist abhängig von der Rohwasserqualität und ist in der Steuerung programmiert.
Die Wasserenthärter Benjamin Z und TK-Z bestehen aus folgenden Hauptteilen:
- Austauscherbehälter mit Austauscherharz (lonenaustauscher):
Der Austauscherbehälter besteht aus glasfaserverstärktem Kunststoff, der eingefüllte lonenaustauscher, aus Kunstharz,.diese sind praktisch geruchs- und geschmacksfrei.
- Zentralsteuerventil:
Der Steuerkopf ist aus Rotguß.
- Salzlösebehälter
mit Solebrunnen und Sole-Schwimmerventil:
Salzlösebehälter, Solebrunnen, Soleventil, Salzboden und Abdeckung sind aus schlagfestem Kunststoff gefertigt.
- Einschub-Timer (Zeitschaltuhr)
- Resthärteprüfbesteck.
BETRIEBS- UND LEISTUNGSDATEN
|
Benjamin |
Füllung Liter Austauscher |
12 |
Durchsatz normal m 3 /h |
0,8 |
Durchsatz maximal (kurzfristig) m 3 /h |
1,6 |
Kapazität Qx H m 3 * °dH |
34 |
Salzbedarf kg pro Reg. |
2,8 |
Salzvorrat in kg ca. |
25 |
Abwassermenge/Reg. in 1 ca. |
120 |
Rohwasseranschluß in Zoll |
1" AG' |
Betriebs- und Umgebungstemperatur 10 - 40 °C
Betriebsdruck minimal 3 bar (bei Regeneration)
Betriebsdruck maximal 8 bar
lonenaustauschertyp KGSOSTO
Elektrischer Anschluß 220 V, 50 Hz
Folgende Regenerierzeiten werden empfohlen:
Rückspülen 10 Minuten
Besalzen / Langsamwaschen 90 Minuten
Schnellspülen 15 Minuten