More Information
Objektnummer	B00012607
ID-number	012607
Object name	Rittalwerk SK 3290 134
Status	Archiv

Status, terms of delivery and payment

Verification of devices

The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.

Dispatch time

The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.

As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.

Shipping methods

Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.

Delivery information

Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.

The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.

Terms of payment

We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.

Country	Possible payment methods	Comment
DE, AT, CH	Payment by invoice, payment in advance, paymet by credit card	Payment by invoice is only possible for corporate clients.
NL, BE, LU	Payment by invoice, payment in advance, payment by credit card	Payment by invoice is only possible for corporate clients
Other countries	Payment in advance, payment by credit card

Our General Terms of Sale, Delivery and Payment are valid and are available for download here.

The goods are offered subject to prior sale.

Definition of status

All articles are used articles, except an article is listed especially as a new device.

Status	Condition	Comment
Immediately available	Used	The article is fully functional and in impeccable condition. It can be shipped immediately.
In stock	Used	The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article.
Published	Used	The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery.
New device	new	The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply.
Labprocure	Used	Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen.

Firma: Rittalwerk

Modell: SK 3290 134

Kommentar: Dokumente deut.

Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.

Sie geben nicht den Lieferumfang des Systems wieder.

Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.

Application

Enclosure cooling units are designed and built to dissipate heat from enclosures, by cooling the air inside the enclosure and protecting temperature sensitive components. Enclosure cooling units are particularly suitable for the temperature range of + 40 °C to + 55 °C.

Technical Data

Operating voltage: 230 V, 50/60 Hz

Rated current: 5,3 A

Starting current: 16,6A

Pre-fuse T: 6A

Duty cycle: 100%

Nom.refrigeration: 710W/800W

Usefull cooling output: 1400W/1400W

Refrigerant: R134a/950g

Permissible pressure: 25 bar

Temperature range: + 20 - +55°C

Noise level: 62dB (A)

Protection categ.:

Internal circuit IP54

External circuit IP44

Dimensions (WxHxD) mm: 600x400x426

Weight: 44 kg

Colour: RAL 7032

Technical Information

The cooling unit (compression refrigeration unit) consists of four main components: the coolant compressor, evaporator, condenser, and the control of expansion valve, which are connected by suitable pipework. This circuit is filled with a readily boiling substance, the collant. The R134a (Ch₂ FC₃ ) coolant is free from chlorine. It has an ozone destroying potential (ODP) of 0 and is therefore environmentally friendly. A filter dryer which is integrated in the hermetically sealed cooling circuit, provides effective protection against moisture, acid, dirty particles, and foreign bodies within the cooling circuit.

Programming

Pro- gram Level	Changeable Parameter	Min. Value	Max. Value	Factory Setting	Description
	International enclosure temperature T	30	45	35	The standard thermostat setting range is 35-45°C. The upper and lower limits can be adjusted through programm level 5 and 6.
2	Set value of filter mat monitor	4	40 (99 = off)	99	Factory setting is the shut off valvue (99). To activate: 1. Install clean filter mat and let air conditioner cool for a few minutes. 2. Select programm level 2. 3. Push test button 10 seconds. Temperature difference is diplayed. 4. Using the ↑ button adjust the temperature 2-3 K above the displayed value.
3	Imperial/metric units °C/°F	0	1	0	The enclosure temperature can be displayed in both °C and °F.
4	Security code			123	In order to access program levels 5 - 9 the code "123" must first be entered through program level 4.
5	Minimum thermostat setting	20	35	30	The minimum thermostat setting can be adjusted from 35°C to 20°C.
6	Maximum thermostat setting	40	55	45	The maximum thermostat setting can be adjusted from 40°C to 55 °C.
7	Alarm setting! for enclosure temperature	3	15	5	Due to the standard factory setting of 5 K the fault code 1 is displayed when the enclosure temperature is 5 K or more above the thermostat setting. This alarm temperature setting can be adjusted from 3 to 15°C.
8	Setting of PLC interface	0	1	0	The factory setting is for serial interface. Parallel interface is activated by selecting 1.
9	Turn off of evaporator fan	0	1	0	With the facotry setting the evaporator fan turns off for 1 minute each time the unit cycles. This helps condensate drainage. This feature can bei turned off by changing the setting to 1.

Product group: Freezers

We can't find products matching the selection.