Perkin Elmer Lambda 11
Objektnummer | B00016940 |
---|---|
ID-number | 016940 |
Object name | Perkin Elmer Lambda 11 |
Status | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, paymet by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: Perkin Elmer
Modell: Lambda 11
Kommentar: Dokumente deut.
Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.
Sie geben nicht den Lieferumfang des Systems wieder.
Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.
Optisches System
Das Lambda 11 UVNIS-Spektrometer arbeitet mit einem totalreflektierenden optischen System. Die optischen Komponenten sind zur besseren Haltbarkeit mit Quarz beschichtet. Als Monochromator dient ein holographisches Gitter.
Eine schematische Darstellung des optischen Systems finden Sie in Bild 5-4. Als Monochromator dient ein holographisches Konkavgitter mit 1053 Linien/mm im Zentrum.
Der spektrale Arbeitsbereich des Gerätes wird mit zwei Strahlungsquellen abgedeckt: einer Deuteriumlampe und einer Halogenlampe. Bei der Arbeit im Bereich des sichtbaren Lichtes (VIS) reflektiert der Spiegel M 1 dn 9 Licht der Halogenlampe auf den Spiegel M2. Gleichzeitig unterbricht M 1 den Strahlengang der Deuteriumlampe. Bei der Arbeit im ultravioletten Bereich (UV) gibt der Spiegel M1 den Strahlengang der Deuteriumlampe auf Spiegel M2 frei.
Das Umschalten Zwischen den Strahlungsquellen erfolgt automatisch, synchron mit dem Drehen des Monochromators.
Die Strahlung der Lichtquelle wird vom Spiegel M2 auf einen optischen Filter auf dem Filterrad gelenkt. Ein SchritLinotor dreht das Filterrad synchron zum Monochromator. Abhängig von der gewünschten Wellenlänge wird der zugehörige Filter in den Strahlengang gedreht. Die Strahlung wird dadurch vor dem Auftreffen auf den Monochromator vorgefiltert.
Der Wechsel der Filter erfolgt automatisch beim Drehen des Monochromators.
Nachdem die Strahlung den optischen Filter passiert hat, trifft sie auf den Eintrittspalt (Spalt 1) des Monochromators.
Die Strahlung wird am Gitter gebeugt und in ein Spektrum zerlegt. Die gewünschte Wellenlänge wird durch Drehen des Gitters auf den Austrittspalt (Spalt 2) projiziert und trifft danach auf den Spiegel M3. Der Austrittspalt 2 verengt den Strahl auf ein nahezu monochromatisches Segment des natürlichen Spektrums der Strahlungsquelle. Die Spalte erzeugen eine spektrale Bandbreite von 2 nm.
Durch den Spiegel M3 wird die Strahlung auf den ebenen Spiegel M4 reflektiert.
Danach werden Probenraum und Probe durchstrahlt. Durch eine Linse wird die Strahlung schließlich auf die Photodiode (Detektor) konzentriert.
Technische Daten
Allgemeines
Typ Registrierendes Einstrahlspektrometer für den UV/VIS-Bereich mit Mikroprozessor und Tastatur. Vorprogrammierte Methoden.
Abmessungen Breite 650 mm
Höhe 233 mm
Tiefe 560 mm
Gewicht ca. 27.5 kg
Netzanschluß 100 V AC. 50/60 Hz oder
120 V AC. 50/60 Hz oder
230 V AC. 50/60 Hz:
300 VA
Umgebungstemperatur 15 °C bis 35 °C
Luftfeuchtigkeit 20% bis 80% relative Luftfeuchtigkeit ohne Kondensatbildung
technische Ausführung gemäß IEC 1010-1/9.90
Entstörung gemäß VDE 08717B
Optik
Querschnitt des Strahls ca. 1 mm x 8 mm (Breite x Höhe),
im Bereich der Küvette im Probenraum
Strahlungsweg im 121 mm
Probenraum
Position des 15 mm über der Unterkante der
Strahlmittelpunktes Küvette.
Gitter Holographisches Konkavgitter mit 1053 Linien/mm im Zentrum
Strahlungsquellen Vorjustierte Deuterium- und Halogenlampen
Wellenlänge
Bereich 200 nm - 900 nm
Anzeige 5 Stellen, Auflösung 0.1 nm
Richtigkeit ± 0,5 nm
Reproduzierbarkeit ± 0,2 nm
Spektrale Bandbreite 2 nm (feststehender Spalt)
Lampenwechsel Automatisch bei 326 nm
Registriergeschwindigkeit 30, 240, 960, 2880 nm/min
Photometrische Daten
Photometrischer 0 %T bis 100 %T
Bereich -3.000 A bis + 3,000 A
1 bis 9999 (Konzentrationseinheiten)
Richtigkeit ± 0.005 A
(Bei 1 A und 440 nin, 546,1 nm und 635 nm gemessen mit NBS 930 Filtern)
Falschlicht < 0.03 %T (bei 220 nm, 340 nm und 370nm)
Basislinie
Linearität ± 0,003 A
(korrigiert. 200 nm - 900 nm. Registriergeschwindigkeit 240 nm/min. Glättang 2)
Rauschpegel < 0,0005 A RMS
(3 min bei 0 A und 500 nm:
RMS = quadratischer Mittelwert)
Stabilität (Drift) < 0,002 A/h
(gemessen bei 500 nm nach 2 Stunden Vorwärmzeit)
Datenausgabe
Ausgabeschnittstelle Eine serielle RS-232-C-Schnittstelle zum Anschluß eines Druckers oder PC: auf Wunsch eine zweite RS-232-CSchnittstelle
Anzeige 40stellige, alphanumerische Vakuumfluoreszenzanzeige für Parameter. Ergebnisse und Bedienungsinformationen
Methoden
Methoden Zeitabhängige Registrierung. Spektrenregistrierung, Wellenlängenprogramm. Konzentrationsbestimmung mit Faktor und Kalibration
Applikationen 16 Standardapplikationen. Methoden mit festgelegten oder variablen Parametern