Millipore Milli-Q
Objektnummer | B00018982 |
---|---|
ID-number | 018982 |
Object name | Millipore Milli-Q |
Status | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, paymet by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.
Sie geben nicht den Lieferumfang des Systems wieder.
Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.
A Bedienfeld
B Sicherungsbügel für Q-Gard-Pack
C Q-Gard-Pack
D Tür für die Verriegelung des Quantum-Packs
E LCD-Anzeige
F LED Statusanzeige
G Tastatur
H Hauptschalter
I Netzanschluß
J Halterung für Netzsicherung
K Wasseranschlüsse
L Reinigungsmittel-Eingabeport für Ultrafiltrationsmodul
M Entnahmestelle mit Entnahmeventil
N Typenschild
O Gehäuseschraube
P Befestigungleiste für Gehäusedeckel
Millipore Milli Q
Systembeschreibung
Das MILLI-Q System produziert Reinstwasser aus durch Elektroentionisierung (E.D.I.), Umkehrosmose (RO), Destillation oder Entsalzung vorbehandeltem Wasser.
Das aus diesem System produzierte Reinstwasser erfüllt oder übertrifft alle Forderungen an Laborwasser Typ 1 nach den Normen der ASTM, CAP und NCCLS.
Funktionsweise
Das durch Elektroentionisierung, Umkehrosmose, Destillation oder Entsalzung vorbehandelte Wasser wird in den Q-Gard-Reinigungspack geleitet, der die erste Reinigungsstufe darstellt.
Danach wird das Wasser UV-Licht (Wellenlänge 185 nm + 254 nm) UV-bestrahlt, wodurch organische Substanzen oxidiert und Bakterien zerstört werden.
Der Quantum-Pack hat die Aufgabe, restliche Ionen im Spurenbereich und oxidierte organische Substanzen zurückzuhalten.
Das gereinigte Wasser durchströmt dann ein Ultrafiltrationsmodul (UF) mit Hohlfasern, das Pyrogene, Kolloide und organische Moleküle mit einem Molekulargewicht von über 5 000 Dalton zurückhält. Die vom UF-Modul zurückgehaltenen Kontaminanten werden in regelmäßigen Abständen automatisch in den Abfluß gespült.
Ein manuelles Dreiwege-Ventil erlaubt es, das Reinstwasser über einen Membran-Endfilter mit 0,22 um Porenweite (Millipak-40) zu entnehmen. Dieser Filter entfernt Bakterien und Partikel, die größer als 0,22 tim sind, und vermeidet eine Rückkontamination des Systems durch die Entnahmestelle.
Das TOC-Analysegerät Al 0 bestimmt den Gehalt an organischen Verunreinigungen im Reinstwasser. Wenn sich das System im Modus PRODUKTION befindet, werden in regelmäßigen Abständen Messungen durchgeführt.
Fließschema
Die folgende Abbildung zeigt das Fließschema Ihres Systems. Es sind nur die Hauptelemente dargestellt.
1 Eingangsmagnetventil
2 Druckerhöhungspumpe
3 Q-Gard Vorbehandlungs-Pack (Wahl je nach Speisewasser-Typ)
4 Quantum-Hochreinigungssäule
5 Widerstands-Meßzelle
6 Entnahmestelle mit Entnahmeventil
7 MILLIPAK 40 Endfilter
8 Rückschlagventil
9 UV-Photooxidationsreaktor
10 Reinigungmittel-Eingabeport des Ultrafiltrationsmoduls
11 Ultrafiltrationsmodul
12 Magnetventil für die Spülung des UF-Moduls
13 TOC-Analysegerät A10
Wasseranschlüsse
Speisewasserschlauch Ø 8 mm, maximale Länge: 3 m
Konzentratabflußschlauch Ø 8 mm und 6 mm, maximale Länge: 2,5 m
Speisewasserdruck Minimum: 0,1 bar (1,5 psi)
Maximum: 0,3 bar (4,5 psi)
Speisewasserfließrate ≥ 1,5 l/min
Speisewassertemperatur 5 °C bis 35 °C
Speisewasser
Millipore empfiehlt, Wasser zu verwenden, das durch die Systeme ELIS oder RiOs vorbehandelt wurde.
Leistungsdaten
Qualität des gereinigten Wassers
Widerstand 18,2 MΩ cm bei 25 °C
Gehalt an Pyrogenen 0,02 EU/ml (Syn + A10)
TOC 5-10 ppb (Ac + Bio)
1-5 ppb ((Gr)
2,5 ppb ((Syn)
Mikroorganismen ≤ 1 KBE/ml
Partikel (0,22µm) < 1/ml
Fließraten
Produktwasser-Fließrate bis zu 1,5 Liter/Minute (Ac + Gr)
Bis zu 1,0 Liter/Minute (Bio + Syn)
Geräusch in dB in einem
Abstand von 1 Meter 42 dB A
Abmessungen und Betriebsgewicht
Höhe 455 mm
Breite 255 mm
Tiefe 355 mm einschließlich Abstandshalter für die Wandbefestigung
Gewicht 16,0 kg (Ac)
16,8 kg (Gr)
16,3 kg (Bio)
17,1 kg (Syn)
+ 0,6 kg mit Analysegerät A10