In combination with the compact Karl Fischer titrators C30 and V30, the Stromboli sample changer enables the titration of up to 14 samples in unattended operation. The samples are automatically transferred to a temperature-controlled oven, from which the evaporated water is transferred to the titration cell via a supplied gas flow. Plug and play. Simply connect the Stromboli to the titrator using the included cable and turn both devices on. You are now ready for your first measurement. The titrator controls the Stromboli. It has no controls and requires no special installation or configuration. Easy sample handling. The 20 ml sample vials are designed for quick and easy handling: you simply add the sample, cover the vial with an adhesive film and place a rubber cap on top. The large volume is ideal for samples with low moisture content or low density. Once analysis is complete, you can easily remove the cap and reuse both cap and sample vial. You don't need any special tools and nothing is wasted. gas or air. The oven can be operated with a laboratory gas supply or with an optionally available air pump. The drying unit ensures that the gas entering the instrument is perfectly dry. A sample changer including drying oven:. Temperature range of 30-300°C. The titration is only started when the set oven temperature is reached. The oven temperature is documented on the printout. Clear display. Stromboli displays the current and preset oven temperatures in large blue illuminated numbers on the top of the instrument. Empty and drift regulations:. Drift determination to compensate for the moisture introduced by the carrier gas. Empty value determination to balance the moisture from the vial and the carrier gas. The values can be entered manually, determined automatically before a series or taken from the last measurement. One or more positions for empty and drift determinations can be freely defined in the titrator method. Labprocure is responsible for this device.