LUWA LP-80/500/25
Objektnummer | B00017607 |
---|---|
ID-number | 017607 |
Object name | LUWA LP-80/500/25 |
Status | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, paymet by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: Luwa
Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.
Sie geben nicht den Lieferumfang des Systems wieder.
Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.
Das neue Modell LP:J:30/500/25 ist die Weiterentwicklung des bewährten Labor-Dünnschichtverdampfers Typ L-82/500/14 Die vorliegende Neukonstruktion basiert auf der Anwendung des Baukastenprinzips. Dies erlaubt durch eine einfache Variation der Bauteile den universellen Einsatz auf dem ganzen Gebiet der Dünnschichttechnik. Wie die Bezeichnung LP-80/500/25 besagt, kann diese neue Ausführung sowohl mit einem starren L-Rotor als auch mit einem beweglichen P-Rotor ausgerüstet werden.
Der zulässige Heizdampfdruck beträgt 25 atü. Für höhere Temperaturen lässt sich dieser Apparat ohne Aenderung mit flüssigen Medien beheizen.
Der Abscheider und das Austragsystem sind als Grundelemente unbeheizt, können aber ebenfalls mit einer zusätzlichen Beheizung von 25 atü geliefert werden.
Für die Messung der Brüdentemperatur und des Innendruckes sind die Anschlüsse Y und Z. vorgesehen.
Das Einsatzgebiet des Verdampfers liegt zwischen 1 Torr und 25 atü. Für Innendrücke grösser als 6 atü ist ein aussenliegendes Druckkompensationssystem notwendig.
Die Abdichtung des oberen Lagers erfolgt mit einer doppelten, einseitig druckentlasteten Gleitringdichtung Typ Crane.
Das Austragssystem besteht einerseits aus einem erweiterten Unterteil mit Lagerstern und Graphitleitlager anderseits aus einem konischen oder zylindrischen Abschlussteil. Diese Anordnung ist universell für den L- und P-Rotor verwendbar. In diesem Teil des Apparates kann für den L-Rotor die patentierte AZ-Regulierung eingebaut werden, mit welcher die Aufenthaltszeit des Produktes im Apparat reguliert wird.
Die Ausführungen mit konischem Unterteil können mit seitlichem Stutzen für die Einblasung von Inertgasen oder Dampf geliefert werden.
Wird der Apparat im Ueberdruckbereich eingesetzt, steht als Zusatzteil ein Gegenflansch mit Rohranschluss-Stück für den Brüdenstutzen zur Verfügung.
Dieses neue Labor-Modell wird nicht nur für die bekannten Operationen wie Konzentrieren Destillieren, Entgasen, Desodorieren, Strippen, eingesetzt, sondern auch für die Durchführung von Reaktionen. Speziell für diese Operation ist der Apparat mit zwei. Produkteintrittstutzen versehen. Bei der Verwendung nur eines Produktstutzens, kann der andere mittels der mitgelieferten Teile rasch und einwandfrei abgedichtet werden.
Die Ausbildung des Laborverdampfers entspricht den grösseren Industrieverdampfern. Deshalb eignet er sich auch vorzüglich als kleiner Produktionsapparat.
Die Bedienung ist äusserst einfach.
Die Demontage des Rotors und des Austragstystems ist in wenigen Minuten mittels Spezialverschraubungen möglich. Dies ist besonders wichtig bei Reinigungsarbeiten vor der Umstellung von einem Produkt auf ein anderes.
Technische Daten
Heizfläche 0,125 m 2
Nominelle Wasserver- ca. 20 kg/h bei einer Differenz
dampfungsleistung von 80°0 zwischen Heiz- und Verdampfungstemperatur
Druck im Innenraum 1 Torr bis 25 atü nach ASME Code
Möglichkeiten der Beheizung gesättigter Wasserdampf nach ASME code bis 25 atü Hochtemperatur wärme übertragungsmittel, flüssig oder dampfförmig bis 350°C.
Antriebsleistung ca. 1,5 PS je nach Durchsatzmenge und Zähigkeit des Produktes
Antriebsart Keilriemen, 3-stufige Scheibe
Nenndrehzahl el. Motor 1500 U.p.M.
Konstruktionsmaterial
Die mit dem Produkt in Berührung kommenden Teile sind aus felgenden Materialien hergestellt:
Verdampferkörper rostfreier Stahl, Chrom-Nickel-Molybdän Typ 316 L mit einem Kohlenstoffgehalt von max. 0,03%.
Rotierende Ringe der Gleit-
ringdichtung Graphit und Teflon
Stationäre Ringe der Gleit-
ringdichtung Ni-Resist und Keramik
Lagerzapfen für das untere rostfreier Stahl Typ 316
Lager stellitiert
Unteres Rotorlaaer Graphit
Dichtungen (Flachdichtungen)
Verdampferkörper Garlock
Heizmittelstutzen Durabla