CO²-Incubators

Thermo Scientific Heracell™ VIOS 250i CO2-In

€15,948.00
Excl. 19% VAT , excl. Shipping Cost
€18,978.12 incl. Vat
ID-number: 101691
Status: New Device?This is a new device. The equipment is unused and factory sealed. For new equipment the warranty of the manufacturer and the statutory warranty period shall apply.
Shipping: 4-6 weeks
Description:
Heracell™ VIOS 250i CO 2 Incubator with Stainless Steel Chamber Achieve your next breakthrough. The Thermo Scientific™ Heracell™ VIOS CO 2 incubator is specifically designed to deliver the performance reliability, ease of operation, and value required to support a range of culturing needs from basic research to the demanding, leading-edge applications, so you're ready for whatever comes next. Better solutions for optimal cell growth. Our CO 2 incubators with non-corrosive stainless-steel interior chambers provide the ideal in-vitro environment. Large 255L capacity provides space for high throughput applications and accommodates spaces for culture devices for larger sample output. Direct Heat Chamber Electropolished stainless steel chamber with a volume of 255 L (9.0 cu.ft.), compact footprint, easily stackable Standard right-hinged door, can be relocated in the field by trained service THRIVE active airflow Fan in the chamber gently distributes clean, humidified air throughout the chamber, ensuring homogeneous conditions Rapid recovery of all parameters in 10 minutes or less for stable culture conditions Auto-stop function disables the fan while the door is open to minimize air exchange ISO Class 5 HEPA filtration HEPA inside makes this total air volume in chamber filtered every 60 seconds ISO Class 5 clean room air quality achieved in culture chamber within 5 minutes Continuous protection prevents airborne contaminants from settling on interior surfaces Covered integral moisture reservoir Directly heated water reservoir ensures even moderately high relative humidity levels and prevents cultures from drying out The cover prevents particles and spilled media from building up in the reservoir, keeping the water clean The separated water creates a condensation-free incubation chamber, which limits the spread area for contaminants 5x faster recovery of moisture levels than traditional water pan designs Easy water handling: moisture reservoir fills and drains without removing soil or culture Water level sensor indicates refill required Optional Steri-Run high-temperature sterilization cycle Independently validated cycle that runs overnight, ensures complete elimination of all biological contaminants 180°C cycle for uniform 12-log sterilization on all chamber surfaces Simplifies cleaning and eliminates separate autoclaving and reassembly r components unnecessary Intuitive, interactive iCAN touchscreen controls Bright LED screen to monitor all interactions with the incubator Provides insight into changes in the culture environment with graphing of performance trends, error and usage logs Convenient on-screen prompts and reminders for users ensure easy navigation Language selection for ease of use: English, Spanish, German, French, Italian, Japanese and Mandarin In-situ sensors and probes for precise control Dual temperature sensors for over-temperature protection with operational backup Thermal Conductivity (TC) CO 2 sensor with rH compensation for fast recovery and smooth operation LeadTargetGroup: xx_ELMS Product Size: Each Search Display: Family Umbrella Brand: Thermo Scientific™ Chamber Material: Electropolished Stainless Steel CO2 Concentration Range: 1 to 20% CO2 Sensor Technology: TC Sensor Oxygen Control: ±0.1°C Humidity Delivery: Integrated Reservoir Relative Humidity: ? 93% Temperature range (metric): 3°C above ambient to 55°C Slots: 3 standard/12 maximum Outputs Data: USB, optional 4-20 mA Qty. of Bays: 3 Standard/10 Maximum Certifications/Compliance: CE, CSA Internal Dimensions (D x W x H): 24.8 x 23.9 x 26.4 in. (62.9 x 60.7 x 67cm) Capacity: 255 L Electrical Requirements: 230V, 50 /60 Hz External dimensions (L x W x H): 36.8 x 30.5 x 38.1 in. (93.4 x 77.4 x 96.8cm) Designation: Heracell VIOS 250i C02 Single Chamber Incubator LeadTargetGroup: xx_ELMS Product Size: Each Search Display: Family Umbrella Brand: Thermo Scientific™ Chamber Material: Electropolished stainless steel CO2 Concentration Range: 1 to 20% CO2 Sensor Technology: TC180 sensor Oxygen Control: Optional 1-21% or 5-90% Humidity Delivery: Covered integrated water reservoir Relative Humidity: =93% at 37° C Temperature Range (Metric): Ambient +3° to 55°C Data Outputs: USB, and optional 4-20mA Certifications/Compliance: CE, CSA Dimensions (D x W x H) Interior: 24.8 x 23.9 x 26.4 in. (62.9 x 60.7 x 67cm) Capacity: 9.0 cu. ft., 255L Electrical Requirements: 230V 50/60Hz Dimensions (L x W x H) Exterior: 36.8 x 30.5 x 38.1 in. (93.4 x 77.4 x 96.8cm) Description: Single 255L incubator, standard model
Installation
We execute the installation of this laboratory device professionally. We would be pleased to offer you the installation of this laboratory device for 520€, excluding travel expenses.

Usually, laboratory and analysis devices are very exigent system with a very own specifications and requirements. Therefore, the startup of a laboratory device often rises the question how to assemble, adjust and to launch it.


We would be pleased to take over the professional installation of your laboratory devices!

Please contact us.


Benefit from the installation by us in more than one way:

  • Immediate and smooth startup of your laboratory device
  • A professional installation extends the lifetime of your laboratory device
  • Guarantee extends to 3 months
  • Freight charges do not apply*
  • You are entitled to benefit from the Labexchange Repurchase Guarantee.

* products of the product groups laboratory furniture and laminar flow are excluded. In individual cases, other product groups can be excluded.


Add to Offer List
More Information
Objektnummer A00101691
ID-number 101691
Object name Thermo Scientific Heracell™ VIOS 250i CO2-In
Status Neugerät
Manufacture Thermo Scientific
Shipping 4-6 weeks

Status, terms of delivery and payment

Verification of devices

The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.

Dispatch time

The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.

As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.

 

Shipping methods

Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.

 

Delivery information

Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.

For deliveries to countries outside the EU, an additional fee of 70,00€ for export is charged. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.

 

Terms of payment

We do not accept payment by credit card, letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.

Country

Possible payment methods

Comment

DE, AT, CH

Payment by invoice, payment in advance

Payment by invoice is only possible for corporate clients.

NL, BE, LU

Payment by invoice, payment in advance

Payment by invoice is only possible for corporate clients

Other countries

Payment in advance

 

 

Our General Terms of Sale, Delivery and Payment are valid and are available for download here. 

The goods are offered subject to prior sale.

 

Definition of status

All articles are used articles, except an article is listed especially as a new device.

Status

Condition

Comment

Immediately available

Used The article is fully functional and in impeccable condition. It can be shipped immediately.
In stock

Used

The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article.

Published

Used

The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery.

New device

new

The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply.

Product group: CO²

Back to Top
part-of-labexchange-group
Search engine powered by ElasticSuite
lazyOwllazyOwl
Labprocure