Laarmann MG 100
Objektnummer | B00019252 |
---|---|
ID-number | 019252 |
Object name | Laarmann MG 100 |
Status | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
For deliveries to countries outside the EU, an additional fee of 70,00€ for export is charged. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by credit card, letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
model : MG 100
annotation : Dokumente engl .
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
Universal, High Performance Mortar Grinder for Processing of solid materials in dry, wet or
cryogenic condition
- Dry Grinding / Wet Grinding / Ultra Fine Grinding / Cryogenic Grinding
- Mixing
- Cell disruption for DNA / RNA extraction
- The MG100 can handle samples from 10 up to 200 ml
Superior Mortar Grinder engineered to reproducibly grind and mix sample volumes from 10 of up to 200ml.
Method of operation
The Mortar Grinder Model MG 100 is used to reproducibly grind, homogenize and mix a wide range of solid materials in dry / wet or cryogenic condition. The material to be processed falls into the Pulverizing area between Mortar and Pestle by top feeding via the opening which is at the inlet cover. The material is then pulverized and mixed between the Mortar inner surface area and the bottom of the pestle.
In order to match the necessary top pressure with the requested end fineness and the breaking behaviour of the sample to be prepared the MG 100 is equipped with and adjustable Top Pressure Mechanism with scale and a variable speed setting 50-130 rpm and a flexible scraper setting.
Only due to the combination of this 3 key adjustment features a wide range of sample preparation tasks can be reached.
No other grinding system is more easy to clean then the MG 100 Mortar Grinder. When the grinding process is finished the Mortar and Pestle can be taken out with a bayonet lock in order to perform a quick cleaning of the grinding tools.
Grinding, homogenizing, triturating
The Mortar Grinder is the central machine in a sample prep. Laboratory of today. This system is suitable for the fine grinding of any dry substance, as well as for suspensions with different viscosities for analysis, quality control and material testing. It is perfectly suitable for the homogenization of crèmes and pastes. Typically samples with a feed size of up to 8-10mm and a total batch of up to 200 ml (volume depending on the characteristic of the samples) can be ground down to 10-20µm.
High operator convenience and maximum safety
Maximum Grinding performance and maximum safety is important for Laarmann Mills. Due to an integrated safety switch the machine can only be started when the Easy Lock Cover is closed. The Adjustment mechanism allows the simple and fast settings and fine adjustment.
The cover as well as the housing of the MG 100 is made from solid steel. The ergonomic design of the machine and the front panel ensures the easy and simple setting of all working parameters.
Performance features MG 100
- Extremely easy cleaning
- Suitable for dry, wet & cryogenic grinding
- Possible to add and to remoove sample material during the milling process via Cover inlet
- Representative results due to digital time and speed setting
- Precise and optimized results due to variable speed 50-130 rpm
- CE conform
- Meet all application tasks due to a wide selection of grinding tools for the mortar and the pestle.
- Meet all application tasks due to a wide selection of scraper materials ( Vulkollan , Teflon, Beachwood)
- Positioning and removal of Mortar and pestle without tool
- Precise and reproducible pestle setting due to scale adjustment
- Solid steel housing
- Option of pre-crushing for coarser materials
Features and benefits
Benefits
- 5 different grinding media available
- 3 different Scraper materials available
- Quick and extremely easy to clean
- Variable Speed Setting 50- 130 rpm
- Digital time setting
- Digital speed setting
- No tool required to open
- No tool required to take off pestle
- No tool required to take off Mortar
- Dust tight Milling chamber
- Wet grinding
- Dry grinding
- Cryo grinding
- CE certified
Applications
- Cocoa Beans / Chocolate Paste etc ..
- Food and Animal food
- Maize, Beans
- Creams, Emulsions,
- Soil samples
- Minerals
- Glass, Ceramics,
- Cement Clinker, Cement
Pharmaceutical and Homeopathic products such as Tabletts , Dragees , Paste, Herbs and pharmaceutical additives
Mortar Grinder Data
Technical Data
Electrical details 100 - 120 / 200 - 240 Volt 50/60 Hz
Speed 50 - 130 rpm Adjustable
Motor Power 200 Watt
Transport Data
Gross dimensions wxdxh app. 600 x 600 x 600 mm
Net dimensions wxdxh app. 390 x 485 x 375 mm
Gross weight 27 kgs (only machine)
Net weight 24 kgs (only machine)
Features / Performance
Working principle friction
Feed size maximum 8 -10 mm depending on sample
Quantity maximum 200 ml
Quantity minimum 10 ml
Endfineness maximum 10 - 20 µm
Grinding time setting 1 - 99 min. / cont. By digital display
Speed setting 50 - 130 rpm by digital display
Start / Stop function By digital display
Pressure setting By scale adjustable
Pestle adjustment By adjustment wheel
Scraper adjustment By adjustment wheel