Keyence VK 9710
Objektnummer | B00015910 |
---|---|
ID-number | 015910 |
Object name | Keyence VK 9710 |
Status | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, paymet by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: Keyence
Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.
Sie geben nicht den Lieferumfang des Systems wieder.
Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.
Technische Daten
Modell |
Mikroskop |
VK-9710 |
|||
Steuergerät |
VK-9700 |
||||
Vergrößerung bezogen auf einen 15"-Monitor |
200 |
400 |
1.000 |
3.000 |
|
Vergrößerung des Objektivs |
10x |
20x |
50x |
150x |
|
Betrachtungs /Messbereich 1 |
Horizontal (H): µm |
1.350 |
675 |
270 |
90 |
Vertikal (H): µm |
1.012 |
506 |
202 |
67 |
|
Betriebsabstand: mm |
16,5 |
3,1 |
0,35 |
0,2 |
|
Numerische Apertur (n.A.) des Objektivs |
0,3 |
0,46 |
0,95 |
0,95 |
|
Optik für Betrachtung/Messung |
Konfokale Optik mit Lochblende |
||||
Höhenmessungen |
Messbereich |
7 mm |
|||
Anzeigeauflösung |
0,001 µm |
||||
Wiederholgenauigkeit σ |
0,02 µm 2 |
||||
Breitenmessungen |
Anzeigeauflösung |
0,001 µm |
|||
Wiederholgenauigkeit 3σ |
0,02 µm 4 |
||||
Bildspeicher |
Pixelanzahl |
2.048 x 1.536, 1.024 x 768 |
|||
Für Monochrombild |
14 Bit |
||||
Für Farbbild |
Je 8 Bit für RGB |
||||
Für Höhenmessungen |
24 Bit |
||||
Optisches Zoom |
1x bis 6x |
||||
Automatik |
AAG (automatische Verstärkung), Autofokus, RPD |
||||
Laserlichtquelle für Messungen |
Wellenlänge |
Violetter Laser, 408 nm |
|||
max. Ausgangsleistung |
0,9 mW |
||||
Klasse |
DIN Klasse 2 |
||||
Lichtempfangselement |
PMT (Photoelectron Multiplier Tube) |
||||
Lichtquelle für optische Betrachtungen |
Lampe |
100 W Halogenlampe |
|||
Farbbildkamera für optische Betrachtungen |
Bildaufnahmeelement |
Farb-CCD-Bildsensor |
|||
Automatische Einstellung |
Verstärkung, Verschlusszeit |
||||
Datenverarbeitungseinheit |
Spezieller Computer von KEYENCE mit dem VK-9700 mitgeliefert (Betriebssystem: Windows XP) |
||||
Gewicht |
Mikroskope |
circa 26 kg (ohne Messkopf: circa 10 kg) |
|||
Steuergerät |
circa 11 kg |
1. Der Betrachtungs-/Messbereich ist das minimale Sichtfeld.
2. Bei Messung eines Standard-Höhenunterschieds von 2 µm mit dem 150x Objektiv.
3. Bei Messung eines Standard-Höhenunterschieds von 2 µm mit dem 100x Objektiv.
4. Bei Messung der Linienbreite von 1 µm auf der KEYENCE Testkarte mit dem 105x Objektiv im Linien-Peak-Modus (Bildmittelung: 8 Mal)
5. Bei Messung der Linienbreite von 1 µm auf der KEYENCE Testkarte mit dem 100x Objektiv im Linien-Peak-Modus (Bildmittelung: 8 Mal)
Abmessungen:
Systemkonfiguration
- Elektromechanischer XY-Objekttisch für die Bildzusammenführung (Optional)
- Objekttisch für 300 mm Wafer (Optional)
- Wegen eines Objekttisches für große Messobjekte setzen Sie sich bitte mit KEYENCE in
Verbindung
- Software für die Betrachtung
- Software für die Bildzusammenführung (Optional)
- Software für die Analyse
- Software für die Partikelanalyse (Optional)
Messprinzip
Die 3D-Laserscan-Farbmikroskope verwenden zwei verschiedene Lichtquellen: eine kurzwellige Laserlichtquelle und eine weiße Lichtquelle zur Beleuchtung. Informationen über Farbe, Lichtintensität und Höhe, die für scharfe, farbige, lichtintensive und relieforientierte Bilder benötigt werden, können durch den gleichzeitigen Einsatz beider Lichtquellentypen gewonnen werden.
(Die kurzwelligen Laserstrahlen erkennen die Intensität des reflektierten Lichts sowie die Höhe).
Der Laserstrahl kommt ans einer punktförmigen Lichtquelle. Das 3D-Laserscan-Farbmikroskop tastet seinen Betrachtungsbereich mit Hilfe des optischen X-Y-Scansystems ab und rastert die Bilder dabei mit einer Auflösung von 1.024 x 768 Pixel. Das Lichtempfangselement erkennt das von jedem einzelnen Pixel reflektierte Licht, Durch Verschieben des Objektivs entlang der Z-Achse und wiederholtes Scannen wird für jede Z-Position die Intensität des reflektierten Lichts erfasst. Es werden daraus Höheninformationen gewonnen, die Lichtintensität wird erkannt und gleichzeitig wird auf die Z-Position für die Intensität des reflektierten Lichts fokussiert. Somit erfasst das 3D-LaserscanFarbmikroskop Daten zur Generierung von omnifokalen Lichtintensitätsbildern mit großer Tiefenschärfe sowie Für Vertikalbilder.
(CCD-Kamera erfasst die Farbinformationen).
Das von des weißen Lichtquelle stammende reflektierte Licht wird mit erkannt. Die CCD-Kamera erfasst Pixel für Pixel die Farbinformationen an dem mit der Laserlichtquelle ermittelten Peak (Brennpunkt): Das 3D- Laserscan-Farbmikroskop ermöglicht daher Betrachtungen in Echtfarben, wozu REMs nicht in der Lage sind.