Jouan KR 22i
Objektnummer | B00010738 |
---|---|
ID-number | 010738 |
Object name | Jouan KR 22i |
Status | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, paymet by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Die KR 22i, eine moderne Hochgeschwindigkeits-Kühlzentrifuge mit großer Kapazität, wird in Forschungslabors zur Trennung von Substanzen verschiedener Dichte mit Hilfe der Zentri‑
fugalkraft eingesetzt.
Durch ihre kompakte Bauweise ist die Zentrifuge in jedem Labor einsetzbar.
Die Zentrifuge ist mit einem von Jouan neu entwickelten Kühlsystem ausgerüstet, daß die
sogenannte Dünnfilm-Technologie (TFT) benutzt.
Hierbei zirkuliert das Kühlmittel sehr schnell durch flache Kühlbänder, die um den gesamten
Rotorkessel gewickelt sind und ermöglicht so eine sichere Temperierung der Proben bei 4°C, dem biologischen Nullpunkt, bei maximaler relativer Zentrifugalbeschleunigung (gemäß den jeweiligen Rotorspezifikationen).
GERÄTEBESCHREIBUNG
ANTRIEB
Die KR 22i-Zentrifuge besitzt einen frequenzgesteuerten asynchronen Motor.
Die maximale Motordrehzal beträgt 22.500 min -1 , ist jedoch im Einzelfall abhängig von der Rotorgröße sowie dessen Beladung. Die Konstruktion eines Rotors entscheidet über die Größe der Füllmenge: ein Festwinkelrotor für hohe Geschwindigkeiten kann mehr Probe-menge aufnehmen als ein Ausschwingrotor. Je größer der Durchmesser eines Rotors mit Zubehör und je größer das Gewicht, je niedriger wird die maximale Umdrehungsgeschwindigkeit.
Die relative Zentrifugalbeschleunigung, bei Berücksichtigung von Rotor und Einsätzen, ist direkt proportional zur Geschwindigkeit und dem Rotorradius. Dies bedeutet: eine größere Geschwindigkeit und/oder ein größerer Radius erzeugen eine höhere Zentrifugalbeschleunigung und damit eine schnellere und bessere Trennung von Partikeln.
SICHERHEITS-DECKEL-VERRIEGELUNG
Die Sicherheits-Deckel-Verriegelung an der KR 22i-Zentrifuge verhindert eine Deckelöffnung während der Zentrifugation. Die Zentrifuge startet nicht, wenn der Deckel nicht richtig verschlossen ist und er läßt sich erst öffnen, wenn die Zentrifuge zum Stillstand gekommen ist. Die Deckel-Indikatorlampe signalisiert Rotorstillstand und der Deckelöffnungshebel an der rechten Geräteseite kann betätigt werden.
UNWUCHT-KONTROLLE
Die KR 22i-Zentrifuge ist mit einem Unwucht-Kontrollsystem ausgerüstet, daß während des ganzen Laufs die Sicherheit der Zentrifuge gewährleistet. Tritt eine nicht mehr tolerierbare Unwucht auf, wird die Zentrifuge automatisch gestoppt. Im Anzeigenfeld erscheint der Text: UNWUCHT, das rote Alarmlämpchen leuchtet und die Maschine kommt zum Stillstand. Nach Deckelöffnung Beladung und Rotorsitz kontrollieren!
KÜHLSYSTEM
Die KR 22i-Zentrifuge ist mit einem schnellen, effektiven Kühlsystem nach der "Dünn-Film-Technologie" (TFT) ausgestattet, welches eine schnelle Abkühlung des Rotorraums gewähr-leistet. Die Lufttemperatur im Kessel wird vom Mikroprozessor ständig überwacht, über das Kühlsystem gesteuert und auf dem Anzeigenfeld ständig angezeigt. Um Proben exakt zu temperieren, Temperatur nach dem Probelauf manuell in der Probe messen und die Differenz zum einprogrammierten Wert als AT (Temperaturkompensation) im Programm eingeben. Durch Eingabe von "TK z.B.: 3°C wird die Probe entsprechend weiter abgekühlt.
SPEZIFIKATIONEN
GRÖßE UND GEWICHT
Größe (HxBxT) in mm 960 x 787 x 690
Packmaße (HxBxT) in mm 1250 x 1000 x 900
Gewicht (netto) 250 kg
Verpackungsgewicht 300 kg
STROMANSCHLUß UND VERBRAUCH
Stromanschluß 220 / 240 V, 50 Hz
Maximaler Verbrauch 5.3000 VA
Durchschnittlicher Verbrauch 3.500 VA
Motorleistung 2.500 W bei 12.000 min -1
Kühlsystem 1,5 HP
LEISTUNGSBESCHREIBUNG
Maximale Geschwindigkeit 22.500 min -1
Maximale R Z B 63.400 x g (mit 8 x 50 mI-Rotor)
Maximale Kapazität 6 x 500 ml Mikroprozessor-Kontrolle
Digitale alpha-numerische Anzeige mit 20 Stellen
Selbstdiagnose-Funktion
Speicherkapazität 50 Programme
Programmschutz durch Passwort
Geschwindigkeit Bereich 2.000 bis 22.500 min -1
Schritte 10 min -1
Präzision ± 30 min -1
Beschleunigung Bereich 500 x g bis 65.500 x g
Schritte 10 x g
Präzision ± 20 x g
Radien 30 bis 175 mm
Zeitschalfuhr Bereich 0 bis 99h, 59 Min. und Dauerlauf
Schritte 1 Minute
Integrator Bereich 100 bis 999 x 10 9 mrd2/s
Schritte 1 mrd 2 /s
Beschleunigungsstufen 10
Bremsstufen 10
Temperatur Bereich -8°C bis +40°C
Schritte 1 °C
Präzision ± 1,5°C
Leistung 4°C bei 18.000 min -1 (40.600 x g) mit 8 x 50 mI-Rotor
Antrieb Direktantrieb
Motor Induktionsmotor
Beschleunigungen
Bereich 10 Stufen (0 bis 9)
Zeitdauer von 0 bis 90% der Maximalgeschwindigkeit bei Stufe 9:
AK 16.20 (32x16 ml) 2 Min. 45 Sek.
AK 50.22 (8x50 ml) 2 Min. 30 Sek.
AK 100.21 (8x100 mI) 2 Min. 10 Sek.
AK 250.14 (6x250 ml) 7 Min. 35 Sek.
AK 500.11 (6x500 ml) 9 Min. 40 Sek.
Bremszeiten
Bereich 10 Stufen (0 bis 9)
Zeitdauer von Maximalgeschwindigkeit bis 0 min -1 bei Stufe 9:
AK 16.20 (32x16 ml) 2 Min. 00 Sek.
AK 50.22 (8x50 ml) 1 Min. 50 Sek.
AK 100.21 (8x100 ml) 1 Min. 50 Sek.
AK 250.14 (6x250 mI) 3 Min. 55 Sek.
AK 500.11 (6x500 ml) 4 Min. 30 Sek.