IGT AC2
Objektnummer | B00013143 |
---|---|
ID-number | 013143 |
Object name | IGT AC2 |
Status | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, paymet by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
Please note, that the following descriptions refer to the successor-model AIC2-5 !
IGT Testing Systems has for many decades been supplying the well-known AIC2-5 printability tester for making numerous types of tests an different substrates and inks in oualitv control and research.
Can test small quantities of ink and substrate in conditions simulating actual practice.
Makes colour strips using various inks an different substrates, which can be used for numerous purposes.
Saves costs because fewer tests need to be made on the printing presses.
APPLICATIONS
The test strips made with the AIC2-5 printability tester are suitable for many purposes:
Measuring colour using colour measuring systems/ spectrophotometers
Use in colour matching systems
The AIC2-5 is used in the following industries:
Printing ink, paper and board, printers
Metals, plastics and packaging
Resins, Iacquers and coatings
Raw materials
Training centres and research institutes
PROPERTIES
The principal properties of the AIC2-5 tester are:
Simple to operate due to the modern software, very reliable and sturdy construction for intensive use over a Iong period, easy and quickly to clean
Manyaccessories available for a wide range of processing possibilities for varioussubstrates and offset, gravure and flexo inks; substrate, ink and printing form are simple and quick to change
§ Repeatability and reproducibility is extremely good
Printing force continuously adjustable from 50 to 1000 N
Two speed types which are both adjustable continuously:
- Constant speed: 0.2 5 m/s
- Increasing speed: 0.5 7 m/s
Extra time interval between 1 st and 2nd printing form, adjustable from 0.2 to 120 s to an accuracy of 0.1 s
Suitable for two printing forms
Maximum printing width 50 mm
Low initial cost and low running costs; complies with the latest standards; provided with detailed instructions for use
Visual appraisal
Density measurements, including establishing colour and density tolerances
Determination of coverage, wear resistance, abrasion resistance, flexibility, adhesion and gloss, ink transfer (in g/mz), Iight fastness, resistance to chemicals, etc.
Testing printing quality, picking, wet pick and wet repellence, roughness, printing penetration, set-off, striking through, mottle, loose and weakly bound paper particles, etc.
The AIC2-5 prints all sorts of materials:
Paper, board, plastic film, cellophane, laminate, metal, etc.
OPERATION
The AIC2-5 printability tester consists of an impression cylinder and a choise of one or two printing forms (printing discs). The printing forces, speed and interval time between the first and second printing disc are adjustable. The printing discs, which are inked on the High Speed Inking Unit 4, are printed on the substrate, which is mounted on the impression cylinder. Many sorts of printing discs are available in various widths for the different tests and inks. When setting the highest speed, interval times of 0.014 s can be achieved. This makes it possible to set practically all the
TECHNICAL DATA
Printing unit
Printing speed:
constant 0.2 - 5 m/s
increasing 0.5 - 7 m/s
Printing force: 50 - 1000 N
Extra interval time: 0.2 - 120 s
Number of printing discs: maximum 2
Printing discs
Printing width: 10, 20, 35 and 50 mm
Printing length: 200 mm
Types:
- Rubber, 85 shore A, coated, for conventional inks
- Rubber, 65 shore A, coated, for conventional inks
- Rubber blanket, for conventional inks - Rubber, 85 shore A, for UV-curing inks
- Rubber blanket, for UV-curing inks - Aluminium
- Also light weight versions < 200 g
General
Complies with EC directives
Inking and printing unit in separate devices
Many accessories available
Simple Operation
Reliable
Low initial cost
Processing of many substrates and inks possible
Easy to move
Detailed instructions for use
Dimensions
Weight: 97 kg
Height: 500 mm
Width: 440 mm
Depth: 500 mm
Electrical connection:
115 - 230 V/ 50 - 60 Hz
Inking Unit AE
The A1-3 or A2-3 printability tester set consists of the printability tester and the IGT inking Unit AE . The printing unit consists of an impression cylinder and one or two printing forms (printing discs). The printing forces are adjustable as well as the speed in case of the use of a spring drive. The printing discs which are inked on the separate inking unit are printed on the substrate which is mounted on the sector. For different tests the sector can be covered with different packings.
The AE Inking Unit was developed for users looking for an uncomplicated way to conduct inking under controlled conditions.
The IGT AE Inking Unit is a slow running inking unit which can be used to ink a maximum of 4 printing discs simultaneously.
The technical design of this inking unit enables the user to make a large number of prints without adding ink or pick test oil and without heating up the device significantly and without influence of misting.
Features:
· Inking time: inking section 60 s and printing disc 30 s
· Extra distribution mechanism for quick distribution of ink
· Rear aluminium drum driven
· Two top rollers with two ink sections each
· Two aluminium drums with top roller
· Low initial costs
· Area 1200 cm 2
· On request suitable for printing discs for new IGT testers
· Rigid construction, can be used in a production environment
· Rubber rollers for conventional or UV-curing inks
· CE compliant
· Size: 600 x 500 x 300 mm
Electrical specs: 115 or 230 V/50-60Hz