IDC TOC
Objektnummer | B00017756 |
---|---|
ID-number | 017756 |
Object name | IDC TOC |
Status | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, paymet by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: IDC
Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.
Sie geben nicht den Lieferumfang des Systems wieder.
Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.
Gerätecharakteristik
Der IDC-TOC-Analysator ist ein kompaktes Gerät zur effizienten und sicheren TOC-Bestimmung in wässrigen Proben. Die Apparatur ist besonders auf hohe Probenvolumina und gute Partikelgängigkeit ausgelegt.
Als Option ist aber auch ein Zusatz für Feststoffe erhältlich.
Die Vorteile des Analysators werden vor allem bei so genannten Problemproben deutlich:
- gefärbte Wässer, die sich nicht vollständig UV-oxydieren lassen,
- Proben mit leichtsedimentierenden Partikeln, bei denen sich im üblichen 200µl-Maßstab keine Probenrepräsentanz erzielen lässt
- Wasser mit schwer aufschließbaren organischen Stoffen (z.B. polyzyklische Verbindungen mit C-N-Gruppen)
Quantitativer Aufschluss
- Pyrolyse und Oxidation der Probe bei 950°C im Sauerstoffstrom, CuO-Katalyse
- Vollständige Überführung der Probe in die heiße Zone des Ofens durch Edelstahlkanüle
- Erhöhung der Standzeit des Quarzglas-Verbrennungsrohres durch Einsatz eines "Opferrohres"
- Bis zu 5 ml Probe dank großem Ofenvolumen und robustem Kondensationssystem auf-schließbar
Dosierung und Flüssigkeitstransport
- Computergesteuerte Spritzenpumpe mit Schrittmotorantrieb zur Bewegung aller Flüssigkeiten (Ansaugen und Dosieren der Probe, Vorlegen der Phosphorsäure, Spülen des Leitungssystems)
- Reinstwasser dient als Spül- und Koppelmedium. Aggressive Flüssigkeiten gelangen nicht in die Kolbenbürette und kommen nur mit hochbeständigem Fluorkautschuk, PTFE und Glas in Berührung.
- Hohe Partikelgängigkeit aller Leitungen und Ventile
- Vermeidung von Probenentmischungen vor der Dosierung
- Minimierung der Probenverschleppung durch integrierten Spülschritt
Detektion und Gasführung
- Sauerstoff als Trägergas und Oxydationsmittel
- NDIR-Messung des CO 2 -Gehaltes im Trägergas
- vollautomatische Integration des Messsignals ohne weitere Eingabe von Integrationsparametern - wahlweise im Präzisions-, Normal- oder im Quickmodus
- Simultane Datenaufnahme und Integration in zwei Messbereichen mit automatischer Messbereichsumschaltung
- Konstanthaltung des Gasflusses auch während Verdampfung/Kondensation
- Maximale Wartungsfreiheit der NDIR-Optik, da zuverlässige Rückhaltung saurer und salzhaltiger Verbrennungsprodukte
- CO 2 -Messwert wird durch "Wasserpeak" nicht beeinflusst
Differenzmethode
Verfahrensweise:
- Messung des gesamten Kohlenstoffgehaltes der Probe - TC (quantitative Verbrennung bzw. Pyrolyse der organischen und anorganischen Wasserinhaltsstoffe)
- Messung des anorganischen Kohlenstoffgehaltes - TIC (Austreibung des CO 2 durch Phosphorsäure)
- TOC-Berechnung aus der Differenz: TOC = TC - TIC
Minimierung systematischer Fehler durch Identität der Bedingungen bei TC- und TIC-Bestimmung:
- einheitliche Gasführung
- Unmittelbare Aufeinanderfolge der Teilbestimmungen
- Anwendung nur eines Dosierers
- Integrationsprogramm mit einheitlichen Abbruchkriterien
Software
- Einfache Bedienung:
Übersichtliche Menüstruktur
Volle Mausunterstützung
Funktionstasten für schnelle Tastaturbedienung
- Erprobte Standardmethode im Doppelbestimmungs-Mode sorgt für solide Analytik im "Normalprobenbereich".
- Hohe Flexibilität: Je nach Probenerfordernis können Methoden durch den Nutzer selbst erstellt werden. Dabei sind sowohl die Reihenfolge analytischer Schritte als auch Proben- und Spülvolumina sowie Präzisions- bzw. Geschwindigkeitseinstellungen in breitem Rahmen frei wählbar.
- Hohe Transparenz der Analytik: Möglichkeit der Darstellung aller messtechnisch wichtigen Vorgänge auf dem Monitor, dadurch sichere Beurteilung der Messergebnisse.
- Ergebnisspeicherung gemäß GLP auf Festplatte
- Option: Probensamplerbetrieb
Wartung
Der IDC-TOC-Analysator ist ein robustes Messgerät. Verschleißteile sind so angeordnet, dass sie durch den Betreiber selbst ausgewechselt werden können. Die meisten Geräteparameter werden durch den Steuercomputer überwacht. Störungen werden automatisch lokalisiert und angezeigt.
Geräteaufbau
Der IDC-TOC-Analysator besteht aus dem Grundgerät, dem TOC-Ofen und dem Steuercomputer mit Monitor, Tastatur und Maus. Optionell sind ein Probenspeicher, ein Magnetrührwerk und ein Matrixdrucker verfügbar.
Technische Daten
Aufschlussprinzip: Thermisch-katalytische Oxidation zum CO 2
Katalysator : vorzugsw. CuO
Aufschlusstemperatur: 300 - 980°C, vorzugsw. 950°C
Messprinzip: NDIR mit Pyrodetektor,
Messbereich: 20 µg/1- 5 g/l C
Reproduzierbarkeit: bei 2 mg/1 C: < 6 %
bei 100 mg/1 C: < 2%
Auflösung: 3,5 Dezimale
Probenvolumen: 200 - 5000µl, vorzugsw. 1000µl
Korngröße: < 100 µm
Analysenzeit: < 6 min bei 30 mg/l C anorg. + 30 mg,/1 C org.
Gasversorgung: Sauerstoff, ca. 30l/h, 2 - 4 bar Vordruck
Stromversorgung: 230 V, 50Hz, 1000 VA, Sonderspannungen möglich
Reagenzien: Phosphorsäure, ca. 10 %-ig
Reinstwasser
Kupferoxid, Stäbchenform etwa 0,6 x 6 mm
Sicapent
Abmessungen: Ofenteil: 200 x 200 x 500 mm
Steuerteil: 350 x 450 x 500 mm
Umgebungstemperatur 15 - 35 °C