Horiba OCMA 220
Objektnummer | B00000957 |
---|---|
ID-number | 000957 |
Object name | Horiba OCMA 220 |
Status | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, paymet by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
manufacturer: Horiba
model: OCMA 220
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
Specifications
OCMA-220
Oil Content Analyzer
Principle
Solventextraction, NDIR analysis
Ranges
0 ~50 ; 0 ~ 200.ppm (dual ranges)
Measuring object
Organic hydrocarbon contamination in fresh or salt water sample
Data display
Liquid crystals, 3-digit panel meter
Repeatability
0 ~ 200 ppm: ±2 % of full scale ±1 digit
0 ~ 50 ppm.±2 % of full scale ±1 digit
Calibration
Known oil/solvent mixture for span calibration;
puresolvent for zero
Sample volume
(A) 0 ~ 200 ppm: :5 ml per measurement
(B) 0 ~ 50 ppm:15 ml per measurement
Solvent
FlonS-316 (Fluorochlorocarbon)**
Solvent volume
(A) 0 ~ 200 ppm: 20 ml per sample
(B) 0 ~ 50 ppm:15 ml per sample
Extraction
By built-in extractor
*Externally extracted samples may also be measured.
Ambient temperature
0 ~ 40°C
Output
0 ~ 100 mV DC
Power requirement
AC line voltage, 50 or 60 Hz to be specified, approx. 50VA
Dimensions
220(W) x 362(D) x 375(H) mm
[8.7(W) x14.3(D) x14.8(11) inch]
Weight
Approx. 10 kg (22 lb)
**Other kind of solvent such as carbon tetrachloride may be used, but the analyzer must be adjusted (including optical alignment) for proper operation.
FlonS-316 is the solvent for extracting oil contents in water developed for oil content measurement, (Patents granted are US PAT. 4164653 and DB PAT 2754293).
Freon-113*may be used instead of FlonS-316, but Freon-113 is highly volatile because of its low boiling point (about 48 °C). For stable measurement when using Freon-113, therefore, the extraction time required for zero and span calibration should be longer than when with FlonS-316. Set the extraction time for zero and span calibration at the same extraction time span required when measuring sample water. For the same reason, conduct measurements when the ambient temperature is controlled constant and the ambient air is ventilated.
(*Freon-113 is a registered trademark of E.I. duPontde Nemours & Co., Inc. for CCI2FCCIF2.)