Hewlett Packard 3392A
| Objektnummer | B00000951 |
|---|---|
| ID-number | 000951 |
| Object name | Hewlett Packard 3392A |
| Status | Stock unit |
Product group: Integrators / Workstations
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
|
Country |
Possible payment methods |
Comment |
|
DE, AT, CH |
Payment by invoice, payment in advance, paymet by credit card |
Payment by invoice is only possible for corporate clients. |
|
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
|
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
|
Status |
Condition |
Comment |
|
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
| In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
|
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
|
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
|
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
manufacturer : Hewlett Packard
model : 3392A
annotation : Dokumente engl.
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
The HP 3392A can be configured in at least three ways:
as a stand -alone instrument.
as the controller an the Instrument Network (INET), controlling an INET-compatible instrument.
connected to a hast computer and operating in either remote or locally-driven mode.
SPECIFICATIONS
OPERATIONAL SPECIFICATIONS
Analog/Digital Conversion
Analog/Digital Continuously integrating dual slope;
Conversion Type: 100% area conversion
Maximum Floating Voltage ±50 V peak
Above/Below Ground:
Input Impedance: 50 MΩ (typical)
15 MΩ (minimum)
Sensitivity: 136 µV/cm at Att2↑ = 0.
Internal Noise: 2 µVp-p MAX, over 1.5 min. with PK WD
0.16 and with a 1500 Ω resistor across signal input; see Note 1,
Drift: 3.5 µV/°C over a temperature range of 0
to +35°C; 10 µV/°C from +35 to +55 °C
Nonlinearity: ± 0.2% maximum
Area per Count: 0.125 µV-sec ./ count, ± 10%
Note 1: This specification applies to environments that are free from
radio-frequency interference (RFI). At attenuation settings less than Att2↑ = 0, when a 1 mV input yields full-scale plotter deflection, the signal path may be affected by RFI in the range of 8 MHz to 150 MHz.
Data Storage and Reporting
Maximum Storage Approximately 1000 peaks
Capacity:
Maximum Retention 327 min.; with option 19 activated; time
Time Reported: scale can be expanded by 10.
Retention Time
Resolution:
--Printing: 0.001 min. (0.06 sec.)
--Calculation and
Identifications: 0.01 min. (0.6 sec.)
Maximum
Sustaining Time:
Nominal
Current Consumed
During
Printer/Plotter
Printer Paper: Thermal. 400 ft. roll, 4.25 in. wide; 4
rolls per box; box is HP patt number S 080- 8800 (blue printing) 9270-i 134 (black printing)
Maximum Plottable Approx. 3.25 x 4800 in. (8.26 cm x
area per roll: 124.7 m)
Att2↑ = 0.
Average Print Speed: 48 characters/sec .
Maximum Chart Speed: 30.0 cm/min.
Print Character Format: 5 x 7 dot matrix
Character Density
( printing ): 14 characters/in.
Maximum Plotting
Velocity: 30 cm/sec. (12.24 in ./ sec.)
Maximum Plotting
Acceleration: 163.26 cm/sec 2 . or 400 in./sec 2
Data Communications and External Control
Connections provided: 4, labeled: SAMPLE, REMOTE, CMPTR,
INSTR NETWORK (in and out).
REMOTE Control: Start Input (TTL): enables external
devices to start the HP 3392A.
Stop Input (TTL): enables external devices to stop the HP 3392A.
Selectable high or low level, edge or level start/stop signal.
External start relay: a one-second contact closure output at start of run.
Ready input live (TTL): senses whether external instruments are in ready state.
Ready output line (TTL, open-collector): indicates whether HP 3392A and all instruments and computer connected to HP 3392A are ready.
SAMPLE: Ability to Bense up to 100 sample numbers (in Binary Coded Decimal, BCD); selectable high or low input levels.
+5 volt output provided.
CMPTR (Computer): RS-232-C protocol with baud rates: 150; 300; 600; 1200; 2400; 4800; 9600; 19,200.
HPDL (HP Data Link) protocol with baud rates: 150; 300; 600; 1200 2400; 4800; 9600; 19,200.
INSTR NETWORK
(1NET): Loop for analytical instruments using an
HP-IL link-level protocol.
PHYSICAL SPECIFICATIONS Electrical
Line Voltage 100, 120, 220, and 240 VAC
Selections Provided:
Line Voltage Tolerante: all selectable voltages: +5%, -10%
Power Consumption: 35 VA (nominal) when unit is in Ready
state ; 45 VA, MAX
Power cord length: Refer to Section 8.
Requirements: 03392-60530, factory -shipped with 3392A.
Safety Classification: Safety Class I
Mechanical
Size:
-Height, top to bottom: 4.25 in. (11 cm)
-Width, left to right: 11.00 in. (28 cm)
-Depth, front to back: 12.50 in. (32 cm)
Weight: (benchtop) 10 lbs. (4.54 kg); with battery pack
installed and no paper loaded.
Mechanical Mounting: Benchtop Installation an a hard, flat
surface with 6 in. (14.7 cm) clearance in front, in back, and along both Eides to allow ample ventilation.
