Hermle Z 200 A
Objektnummer | B00015269 |
---|---|
ID-number | 015269 |
Object name | Hermle Z 200 A |
Status | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, paymet by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Kleinzentrifuge für den Einsatz in der Arztpraxis und im Labor
Kurzbeschreibung
Gehäuse aus stoßfestem und chemikalienbeständigem ABS-Material
digitale Anzeige für Soll- und Istwert von Drehzahl und Laufzeit
automatische Unwuchterkennung und Abschaltung
Drehzahlvorwahl von 250 min-1 bis 6.000 min-1 in 250 min-1 Schritten
Laufzeitvorwahl von 0,5 Min. bis 30 Min. in 0,5 Min. Schritten
Mikroprozessorsteuerung "HERMLE Standard-Control" mit einfachster Bedienung durch Potentiometer
Gerät entspricht der CE-Anforderung
Gebaut nach IEC 1010
Z 200 A Kleinzentrifuge für Praxis und Labor
Bis zu 12 Stück Probenröhrchen 15 ml (auch Falcon) lassen sich in der Z 200 A einsetzen. Für kleinere Abmessungen und Blutentnahmesysteme bieten wir Reduzierungen an. Für größere Voluminas bieten wir alternativ einen Winkelrotor für 6 x 50 ml (auch Falcon) an.
Technische Daten:
Volumen : max. 12 x 15 ml / 6 x 50 ml
Drehzahl:
max. Drehz./RZB: 6000 min -1 / 4185 x g
min. Drehz./RZB: 250 min -1 / 7 x g
Einstellbereich: 250 - 6000 min -1
Drehzahlvorwahl: mit Drehknopf in 250er Schritten
Drehzahlanzeige: Soll-und Istwert digital
Laufzeit:
max. Laufzeit: 30 min. / Dauerlauf
min. Laufzeit: 0,5 min.
Einstellbereich: 0,5 - 30 min. / Dauerlauf
Laufzeitvorwahl: mit Drehknopf in 0,5 min. Schritten
Laufzeitanzeige: Restlaufzeit - digital
Bremse:
fest eingestellte Bremskraft
Merkmale:
- Mikroprozessorsteuerung
- Gleichstromantrieb
- Gehäuse aus stoß- und chemikalienbeständigem ABS - Material
Sicherheitseinrichtungen:
- Deckelzuhaltung und Verriegelung
- Unwuchtabschaltung
- Gebaut und geprüft nach: IEC 1010, UVV VBG 7z
Abmessungen:
Gerät
Breite: 28 cm
Höhe: 26 cm
Tiefe: 37 cm
Gewicht: 15 kg
Leistungsaufnahme:
100 W
Rotoren für Z 200 A
Winkelrotor 12 x 15 ml Winkelrotor 6 x 50 ml
Winkelstellung: 28° Winkelstellung: 28°
Best-Nr.:220.96 V01 Best.-Nr.:220.97 V01
Max. Durchmesser. 17,5 mm Max. Durchmesser. 30 mm
Max. Länge: 133 mm Max. Länge: 115 mm
Max. Drehzahl in min -1 6000 6000
Beschleunigungszeit in sec. 63 57
Bremszeit in sec. 38 46
Max. Radius in cm 10,4 cm 9,5 cm
Max. RZB in x g 4185 xg 3823 xg
Zubehör Best-Nr. 601.005 Best-Nr. 603.000
Ersatzhülse für 15 ml Ersatzhülse für 50 ml
Falcon und Rundboden Falcon und Rundboden
Ø max.: 17,5 mm Ø max.: 30 mm
Länge min.: 112 mm Länge min.: 95 mm
Länge max.: 133 mm Länge max.: 115 mm
max. RZB: 4185 xg max. RZB: 3823 xg
Best-Nr. 603.001
Hülse für 15 ml
Falcon und Rundboden
Ø max.: 17,5 mm
Länge min.: 112 mm
Länge max.: 133 mm
max. RZB: 3944 xg
Adapter für Hülsen 601.005 und 603.001
Best-Nr. 701.010 Best.-Nr. 701.011
Adapter für 15 ml Adapter für 7,0 ml
Ø max.: 17,5 mm Ø max.: 13,5 mm
Länge min.: 95 mm Länge min.: 95 mm
Länge max.:115 mm Länge max.: 115 mm
Best.-Nr.701.012
Adapter für 5 ml
Ø max.: 13,5 mm
Länge min.: 70 mm
Länge max.: 90 mm