Flottweg Z18-3
Objektnummer | B00015017 |
---|---|
ID-number | 015017 |
Object name | Flottweg Z18-3 |
Status | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, paymet by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: Flottweg
Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.
Sie geben nicht den Lieferumfang des Systems wieder.
Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.
Der Dekanter wird mit dem zu trennenden Medium durch die hohle Mittelachse beschickt (1). Die spezifisch schwereren Feststoffe werden unter dem Einfluß der Zentrifugalkraft am Trommelmantel (2) abgelagert.
Die abzutrennende Flüssigkeit (3) durchläuft die Klärzone in Richtung Schälkammer und wird durch die Schälscheibe (4) unter Druck in einem geschlossenen System nach außen abgeführt.
Der am Rotormantel anliegende Feststoffring (5) wird durch die konisch-zylindrische Transportschnecke (6) über den Trommelkonus (7) zu den Aus tragsöffnungen (8) gefördert und in das Feststoffgehäuse abgeschleudert.
Der Feuchtigkeitsgehalt der Feststoffe und die Reinheit der Flüssigkeit können geregelt werden:
a) durch Veränderung der Teichtiefe über die verstellbare Schälscheibe:
- niedrigerer Feuchtigkeitsgehalt der Feststoffe durch größeren Schäldurchmesser und damit längere Trockenzone.
- geringerer Feststoffanteil im Ablauf durch kleineren Schäldurchmesser und damit größere Flüssigkeitshöhe.
b) durch Veränderung der Dekanterdrehzahl:
- je feiner die Feststoffe um so höher die erforderliche Dekanterdrehzahl für eine ausreichende Abscheidung.
c) durch Veränderung der Schneckendifferenzdrehzahl (s. Drehzahltabelle - Kap. 5):
- je geringer die Restfeuchte des ausgetragenen Feststoffes sein soll, desto kleiner wird die Differenzdrehzahl gewählt.
- je höher der Feststoffanteil, desto höher ist die erforderliche Differenzdrehzahl.
Technische Daten Z 18-3/401
Trommel
max. Trommeldrehzahl bei max. Dichte 7500 min -1
max. Dichte des Feststoffes 2,0 kg/m 3
größter lichter Durchmesser 180 mm
Trommelinnenlänge 570 mm
Trommelwanddicke 7 mm
Werkstoff 1.4571
Massenträgheitsmoment I 0,8 kgm 2
Schnecke
Teilenummer 2113.708.02
Art 1-gängig
Verschleißschutz Wendel Kobaltbasiswerkstoff
Einlaufteil Keramik
Maschineneinstellung
Trommeldrehzahl 7500 min -1
Differenzdrehzahl der Schnecke 3.....50 min -1
Max. Produkttemperatur: 100 °C
Getriebe: Cyclo DFSZ 3/25
Elektromotor: Trommel Schnecke
Hersteller Loher Loher
Typ 132 S 112M
Leistung 7,5 kW 4 kW
Spannung 380 V 380 V
Frequenz 50 Hz 50 Hz
Drehzahl 3000 min -1 3000 min -1
Maße und Gewichte:
Aufbaumaßblatt C 377.0003.00
(mit Gewichtsangaben, Anschlußmaßen und Fundamentierungsplan)
Sonderausrüstung: Trommeldrehzahl und Differenzdrehzahlmeßeinrichtung
Die Drehzahlmeßeinrichtung dient zur Erfassung und Anzeige von Differenz- und Trommeldrehzahl des Dekanters. Die Erfassung der notwendigen Impulse erfolgt über zwei am Dekanter montierte induktive Näherungsschalter nach NAMUR. Die Trommeldrehzahl wird mit einer Auflösung von +/-1 min -1 , die Differenzdrehzahl mit einer Auflösung von +/- 0,1 min -1 , angezeigt.
Zudem ermöglichen die beiden mit "TDA" und "SDA" gekennzeichneten Leuchtdioden an der Vorderseite des Gerätes die Kontrolle der Initiatorfunktion.
Die beiden Leuchtdioden "V" und "N" zeigen an, ob der Dekanter "V"= voreilend oder "N"= nacheilend betrieben wird.
Option-Analog - und BCD - Ausgang
Das Gerät kann mit je einem Analogausgang für Trommeldrehzahl und Differenzdrehzahl ausgestattet werden. Mit einem Schalter auf der Rückseite des Gerätes erfolgt die Umschaltung zwischen 0-20 mA oder 4-20 mA Ausgangssignal. Der BCD - Ausgang dient zum Anschluß eines Flottweg Grenzwertkomparators.
TECHNISCHE DATEN Meßeinrichtung
Drehzahlmessung
Meßbereich ca. 500... 9999 min -1 beide Meßkanäle
Meßgenauigkeit 0,1 min -1
Anzeigeauflösung Trommeldrehzahl 1 min -1
Differenzdrehzahl 0,1 min -1
Meßzykluszeit 1 Sekunde
Impulsaufnehmer Induktive Zweidraht-Näherungsschalter nach NAMUR-Spezifikation
Impulszahl 2 Impulse pro Umdrehung
Analogausgänge
Ausgangsstrom 0-20 mA oder 4-20 mA, wählbar für beide Ausgänge gemeinsam
Bürdewiderstand 0... 500 Ohm
Ausgangsspannung 14 Volt, ohne Bürdewiderstand
Skalierung Trommeldrehzahl-Analogausgang
Ausgangsstrom = 20 mA A/9999 min -1 oder 4 mA + 16 mA/9999 min -1
Differenzdrehzahl-Analogausgang
Ausgangsstrom = 20 mA/100 min -1 oder 4 mA + 16 mA/100 min -1
Stromversorgung
Versorgungsspannung 95...220 Volt, 50... 60 Hz
Sonderausführung: 24 Volt DC ... 100 Hz, +/-20%
Leistungsaufnahme ca. 6 VA, je nach Ausführung
Betriebstemperatur 0... +45 °C
Lagertemperatur -40... +85 °C