FinnAqua Lyovac GT 2
| Objektnummer | B00007818 |
|---|---|
| ID-number | 007818 |
| Object name | FinnAqua Lyovac GT 2 |
| Status | Stock unit |
Product group: Freezers
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
|
Country |
Possible payment methods |
Comment |
|
DE, AT, CH |
Payment by invoice, payment in advance, paymet by credit card |
Payment by invoice is only possible for corporate clients. |
|
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
|
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
|
Status |
Condition |
Comment |
|
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
| In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
|
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
|
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
|
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
The LYOVAC GT 2 is a table-top freeze-dryer. The vacuum pump can stand either an the floor or on the bottom shelf of the trolley. lt is connected to the basic unit by means of a vacuum line. This freeze-dryer is very versatile because of its modular design. Using the acrylic glass cylinders - 185 and 440 - it is possible to operate following the one-chamber system for drying with the manifold, or following the two-chamber principle for during both with the manifold and with trays.
The unit is evacuated by means of a two-stage vacuum pump Type TRIVAC D 4 B or D 8 B which has its gas ballast valve open during the evacuation process. As soon as the pump is switched off, the suction port valve fitted in the vacuum pump closes automatically and the pump is vented at the same time. The pressure in the chamber rises either because of a leak in the system and/or because of the gas being released slowly by the product. (See operating instructions of the vacuum pump).
The condenser coils are cooled by means of a one stage cooling compressor. The condensing surface is designed in such a way that the large amounts of water vapor which arise at the beginning of the process can be condensed. It is possible to dry certain products on trays directly between the coils of the condenser tube.
When the unit is switched off, the condenser coils are isolated from the vacuum pump by the suction port valve. After venting, the ice on the condenser coils warms up and slowly begins to melt. More rapid defrosting can be attained by pouring water over the condenser coils. During the defrosting process, the basic components of the unit are put at the back of the basic unit.
The cooling unit, consisting of a one-stage, air-cooled cooling compressor, operates with refrigerant R 502 and is used to cool the condenser coils. When the FREEZING button is pressed, the compressor is switched on after a time delay. If the DRYING button is pressed, the vacuum pump is also switched on.
Pressure measurements are carried out by means of a vacuum gauge with a measuring range from ambient pressure to 10 -3 mbar. The gauge is integrated into the operating panel of the basic unit.
Technical Data-Basic Unit
Drying capacity for ice in 24 h: approx. 3 kg
At a drying pressure of p = 6.5 x 10 -1 mbar
Maximum ice storage capacity: 5 kg
Final condenser temperature at 20°C
ambient temperature:
- at atmospheric pressure: approx. -45°C
-under vacuum: approx.-55°C
Defrosting medium: water
Refrigerating capacity at a refrigerant
evaporating temperature (ET) of:
-25°C: approx. 630 W
-35°C: approx. 390 W
Refrigerant: R 502
Vacuum connection: DN 16 KF
Mains connection: 220 V, 50/60 Hz
Power input at 50 Hz:
- with a TRIVAC D 4 B pump: approx. 1.65 kVA
- with a TRIVAC D 8 B: approx. 1.70 kVA
Heat radiation: approx. 1.30 kW
Overall dimensions without accessories:
(WxHxD):
approx. 525 x 355 x 730 mm
Weight without accessories: approx. 55 kg
Noise level of basic unit:
- Without vacuum pump: 54 dB (A)
- With a TRIVAC D 8 B: 59 dB (A)
Your Labexchange-Team will gladly help:
Christian Schmid
Laboratory and analysis, Laboratory equipment, Life science
Hubert Sauter
Spectroscopy, Chromatography
