FIDI RSV 600 AXH
Objektnummer | B00012793 |
---|---|
ID-number | 012793 |
Object name | FIDI RSV 600 AXH |
Status | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, paymet by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.
Sie geben nicht den Lieferumfang des Systems wieder.
Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.
ALLGEMEINES
Die FIDI Destilliergeräte ermöglichen die Rückgewinnung von ENTZÜNDBAREN und NICHT ENTZÜNDBAREN Lösemitteln mit Siedetemperaturen zwischen 50/200°C, und in Verbindung mit einem Vakuumgenerator (Optional), für Temperaturen bis zu 250°C. Durch Ausnutzung des einfachen Destillationsprinzipes werden mit den Geräten die Schmutzstoffe (Harze, Lacke, Pigmente, öle, Fette, etc.) vom Originallösemittel getrennt. Das direkt in Behältern aufgefangene Lösemittel steht zur sofortigen Wiederverwendung zur Verfügung.
Die Schmutzstoffe setzen sich am Kesselboden ab und können am Zyklusende problemlos entfernt werden. Die Eigenschaften des behandelten Lösemittels werden durch den Prozess nicht verändert, so dass er dementsprechend beliebig oft wiederholt werden kann.
Funktionsprinzip
Das Sieden des verschmutzten Lösemittels erfolgt in einem Kessel mit einem Mantel aus Wärmeträgeröl. Die Erwärmung erfolgt durch einen elektrischen Heizstab. Die produzierten Dämpfe werden in einen luftoder wassergekühlten Kondensator geleitet und dort wieder verflüssigt; das so kondensierte Lösemittel wird direkt in einem Behälter aufgefangen.
Die Sicherheiten
Der Betrieb des Destilliergerätes erfolgt bei Normaldruck.
Unnormale Temperaturerhöhungen oder eine Fehlfunktion des Kondensators werden
angezeigt und das Gerät schaltet automatisch ab.
Der Betrieb
Der Betriebszyklus verläuft automatisch.
Der Einsatz des Bedienpersonals beschränkt sich auf die Gerätebefüllung, auf die
Temperatureinstellung und Destillationsdauer und auf die Entleerung der Rückstände.
TECHNISCHE EIGENSCHAFTEN |
||||
ALLGEMEINES |
Einh . |
Modell D 60 A |
||
PROZESS |
|
Einfache Destillation |
||
BETRIEBSZYKLUS |
|
Diskontinuierlich |
||
DESTILLIERBARE LÖSEMITTEL |
|
Entzündbar und Nicht entzündbar |
||
MAXIMALE OBERFLÄCHENTEMPERATUR |
°C |
240 |
||
KESSEL |
||||
GESAMTKAPAZITÄT |
dm 3 |
95 |
||
MAXIMALE FÜLLKAPAZITÄT |
dm 3 |
50 60 |
||
KESSELKIPPUNG |
|
Manuell |
||
MATERIAL |
|
Nicht rostender Stahl AISI 304 |
||
HEIZUNG |
||||
LÖSEMITTELAUFHEIZUNG |
|
Indirekt durch Wärmeträgeröl |
||
ÖLZIRKULATION |
|
Natürlich |
||
AUSRÜSTUNG MIT WÄRMETRÄGERÖL |
Dm 3 |
33 |
||
AUFHEIZUNG WÄRMETRÄGERÖL |
|
Mit elektrischen Heizstäben |
||
HEIZSTÄBE |
|
N° 1 x 4000 W |
||
DAMPFKONDENSATION |
||||
LUFTGEKÜHLTER KONDENSATOR |
|
Kupfer |
||
|
▪ |
Nicht rostender Stahl AISI 304 |
||
ELEKTRISCHE ANLAGE |
||||
ELEKTRISCHE AUSFÜHRUNG |
|
Explosionsschutzgeprüft "EEx d IIB T..." |
||
INSTALLIERTE ELEKTRISCHE LEISTUNG |
W |
4200 |
||
NENNSTROM |
A |
11 / 6.4 |
||
NENNSPANNUNG |
V |
400 |
||
ELEKTRISCHE VERSORGUNG |
|
3 Phasen + Erde |
||
-PROGRAMMIERUNG MIT ELEKTRONISCHER LOGIK |
||||
PROGRAMM MIT 2/5 PHASEN |
HSE 002 |
|||
BETRIEBSLEISTUNGEN |
||||
DESTILLATIONSTEMPERATUR |
°C |
50 200 |
||
TIMER |
h |
05 |
||
DURCHSCHNITTL. DESTILLATIONSDAUER"ZYKLUS 1" |
h |
3.00 - 4.00 |
||
DURCHSCHNITTL. PRODUKTION BEI VOLLEM BETRIEB |
dm 3 /h |
15 20 |
||
ASSISTENZ AN DER ANLAGE |
||||
BEFÜLLUNG MIT LÖSEMITTEL |
|
Manuell |
||
ENTLEERUNG DER FLÜSSIGEN RÜCKSTÄNDE |
|
Durch Kesselkippung |
||
MAXIMALE ABMESSUNGEN |
||||
BREITE x TIEFE x HÖHE |
m |
1,94 x 1,03 x 2,18 |
||
GEWICHT: A - Ax |
kg |
306 335 |
||
VERSCHIEDENES |
||||
UMGEBUNGSTEMPERATUR |
°C |
-10 +30 |
||
GERÄUSCHENTWICKLUNG |
dB A |
65 |
||
SERIENMÄSSIG ▪ AUF ANFRAGE |
||||