Eppendorf 5415 C
| Objektnummer | B00007883 |
|---|---|
| ID-number | 007883 |
| Object name | Eppendorf 5415 C |
| Status | Stock unit |
Product group: Centrifuges (various)
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
|
Country |
Possible payment methods |
Comment |
|
DE, AT, CH |
Payment by invoice, payment in advance, paymet by credit card |
Payment by invoice is only possible for corporate clients. |
|
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
|
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
|
Status |
Condition |
Comment |
|
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
| In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
|
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
|
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
|
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
The Centrifuge 5415 C is a bench-top centrifuge with fan cooling for laboratories in the life sciences, clinical chemistry, medicine and industrial research. The device is easy and convenient to operate.
18 Eppendorf Micro Test Tubes can be centrifuged simultaneously in a fixedangle rotor at 14,000 rpm (RCF = 15,800). A 24-place rotor is available for 0.5 ml tubes and a 30-place rotor for 0.4 ml tubes.
The Eppendorf Centrifuge 5415 C (Fig. 1) is used for quickly separating precipitates and liquids of different specific densities.
The standard rotor F 45-18-11 is a 45° fixed-angle rotor for 18 Eppendorf tubes with an 11 mm diameter. Maximum load per bore: 4.2 g.
There are two special rotors for tubes with a smaller diameter:
- Special rotor F 38-24-8 is a 38° fixed-angle rotor for 24 Eppendorf tubes with an 8 mm diameter.
Maximum load per bore: 2.0 g.
- Special rotor F 38-30-6 is a 38° fixed-angle rotor for 30 Eppendorf tubes with a 6 mm diameter.
Maximum load per bore: 1.5 g.
These Eppendorf rotors may only be used in the Centrifuges 5415 C and 5402.
The rotational speed is continuously adjustable from 1,000 to 14,000 rpm. Spin times up to 30 min can be set on the timer. Short centrifuging times can be regulated using the momentary switch. Upon operating the momentary switch, the centrifuge always accelerates to the max. possible rotational speed of 14,000 rpm (independent of the setting of the speed control dial).
The centrifuge is air-cooled. A fan integrated into the base of the housing cools the rotor which heats up during centrifugation. After the run, the fan cools the rotor down to room temperature.
Technical data
Centrifuge 5415 C
Centrifuge in accordance with German norm UVV VBG 7z.
The transport, storing and operating conditions are divided in the applicational range according to DIN 40 040.
Power supply: 220 V / 50 Hz
115V / 60Hz
100V / 60Hz
Rotational speed (rpm): continuously adjustable from 1,000 to 14,000 rpm (regulated to ± 1 %)
Acceleration time: approx. 10 sec
Deceleration time: approx. 15 sec
Power consumption: 250 W
Noise level: 70 dB(A)
Dimensions (W x D x H): 21.0 x 28.5 x 28.0 cm
Weight: 6.5 kg
Rotors:
Max. rotational speed: 14,000 rpm
Weight with cover: 0.55 kg
Max. kinetic energy: 1,500 Nm
Rotor F 18-45-11 (18 bores with 11 mm diameter):
Angle of bore/rotor axle: 45°
Rotor code (DIN 58 970 TI): k = 460 h
Max. load: 4.2 g/bore
Rotor F 24-38-8 (24 bores with 8 mm diameter):
Angle of bore/rotor axle: 38°
Rotor code (DIN 58 970 TI): k = 500 h
Max. load: 2.0 g/bore
Rotor F 30-38-6 (30 bores with 6 mm diameter):
Angle of bore/rotor axle: 38°
Rotor code (DIN 58 970 TI): k = 540 h
Max. load: 1.5 g/bore
Your Labexchange-Team will gladly help:
Christian Schmid
Laboratory and analysis, Laboratory equipment, Life science
Hubert Sauter
Spectroscopy, Chromatography
