More Information
Objektnummer	B00013211
ID-number	013211
Object name	Dynex Opsys MW8
Status	Archiv

Status, terms of delivery and payment

Verification of devices

The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.

Dispatch time

The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.

As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.

Shipping methods

Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.

Delivery information

Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.

The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.

Terms of payment

We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.

Country	Possible payment methods	Comment
DE, AT, CH	Payment by invoice, payment in advance, paymet by credit card	Payment by invoice is only possible for corporate clients.
NL, BE, LU	Payment by invoice, payment in advance, payment by credit card	Payment by invoice is only possible for corporate clients
Other countries	Payment in advance, payment by credit card

Our General Terms of Sale, Delivery and Payment are valid and are available for download here.

The goods are offered subject to prior sale.

Definition of status

All articles are used articles, except an article is listed especially as a new device.

Status	Condition	Comment
Immediately available	Used	The article is fully functional and in impeccable condition. It can be shipped immediately.
In stock	Used	The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article.
Published	Used	The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery.
New device	new	The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply.
Labprocure	Used	Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen.

Firma: Dynex

Modell: Opsys MW8

Kommentar: Dokumente engl.

The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.

The Opsys MW^TM is an economical, full-featured 96-well microplate strip washer that complements the Opsys MR^TM microplate reader. The Opsys MW^TM is an excellent choice for many laboratories because of its simplicity, ease-of-use, flexible and intuitive protocol definition, and options for 12-way (row) or 8-way (column) microplate washing for full plates or strips.

The Opsys MW^TM is a microprocessor-controlled microplate washing system that performs wash protocols that are defined by the user. lt is designed to wash all of the wells in one column or one row of a 96-well plate at once. The washing protocol can be programmed so that all of the columns (or rows) are washed in the saure manner, or different wash cycles can be appiied to specified columns (or rows) on the plate.

Flexibility

The Opsys MW provides a surprising amount of flexibility for its size and price. User-definable plate types and wash protocols provide significant versatility.

¨ You can wash whole or partial plates by row or column with interchangeable 8-way and 12-way wash heads.

¨ Combine prime, dispense, soak and aspirate steps in any order, defining the duration and repetition of each protocol step. Soak times can range from 1 to 999 seconds.

¨ Define, name, save and password-protect up to 10 microplate definitions.

¨ Define, name, save, copy and password-protect up to 40 wash protocols.

¨ Control how vigorously the Opsys MW cleans the bottom of each well by choosing the precise wash head height you need.

Performance

The Opsys MW^TM provides consistent results with low well-to-well variation. Sweep mode aspiration provides minimal residual volume on flat bottom microplates.

¨ Dispense precision of 5% CV for 96 wells, using 300 µL of distilled water.

¨ Sweep mode aspiration provides a "sweeping" wash head movement during aspiration to achieve reproducibly low residual volumes.

¨ Low residual aspirate volumes of <1 µL for U, V, and C bottom microplates; and <5 µL for flat bottom plates (with sweep mode).

¨ On-board seif-diagnostic routines automatically assure that the Opsys MW is functioning properly each time it is turned on.

Convenience

The Opsys MW provides key features that simplify setup, protocol definition, operation, and cleanup.

¨ Compact dimensions conserve valuable bench space.

¨ 8-way and 12-way wash heads can be quickly and easily interchanged to wash full or partial microplates by row or colu nn.

¨ A "show" function provides quick verification of wash head height settings when defining a wash protocol.

¨ Notification to user when the waste bottle is full.

Features

The Opsys MW^TM system has a number of performance and convenience features. These are summarised below:

¨ Small footprint

¨ Up to 40 wash protocols can be programmed

¨ Up to ten plate types can be programmed

¨ Two wash head configurations (1 x 8 and 1 x 12)

¨ On-board seif diagnostics

¨ SHOW function allows visual verification of wash head height settings

¨ High-Ievel alarm an Waste Container

Programming

All wash protocols on the Opsys MWTM Microplate Washer are userdefined. Up to 40 wash protocols can be contained on the system.

Note: Memory limitations may restrict the size and complexity of an individual wash protocol.

In addition, the system can be configured with up to ten different plate types so that the wash head positions for each plate type can be specified.

Programming of a new wash protocol (or modifying an existing one) and configuration of the system are carried out using the keypad and display.

Specifications

Dimensions and Weight

Length 49 cm (19.3 in)

Width 38 cm (15.0 in)

Height 19 cm (7.5 in)

Weight 9.1 kg (20 Ibs)

Operation

Dispense Range 50 999 µL

Dispense Precision 5% CV (with 300 µL distilled water)

Residual Aspirate Volumes < 1 µL for U and V bottom plates

< 5 µL for flat bottom plates

Washing Time Typical 5 cycle wash: 5 min 30 sec

Power < 100 W

Display 2 by 20 character back lit LCD

Keypad 21 key tactile membrane

Output Display, Printer, RS232

Environmental

Operating Range 15° C to 30° C

15% to 85% relative humidity (non-condensing)

2000m altitude

Computer Interface

Port Serial RS-232 port (Service Access)

Baud Rate 19200. Character format

Character Format 7 data bits, 1 stop bit, no parity

Power Requirements

Voltage Power Frequency

Main Unit 100 - 240 V 200 VA 50/60 Hz

Line Voltage Variation ± 10%

Line Frequency Variation ± 3 Hz

Input Ranges

Assay Programming

Assay Name Up to 10 characters

Password Up to 8 characters

Move: Start Strip 1 - 8 for 1 x 8 heads and 1 - 12 for 1 x 12 heads (Increment: 1)

Move: End Strip 1 - 8 for 1 x 8 heads and 1 - 12 for 1 x 12 heads (Increment: 1)

Move: #Cycles 1 - 9 (Increment: 1)

Aspirate: Cycles 1 - 9 (Increment: 1)

Dispense 50 - 999 (Increment: 1µL)

Purge 50 - 9999 (Increment: 1 µL)

Fill 50 - 300 (Increment: 1µL)

Soak 1 - 999 (Increment: 1 second)

Plate Setup

Plate Name Up to 10 characters

Dispense Height 001 - 999 (Increment: 1)

Top of Well Height 001 - 999 (Increment: 1)

Aspirate Height 001 - 999 (Increment: 1)

Sweep Height 001 - 999 (Increment: 1)

Sweep Stroke 001 - 999 (Increment: 1)

Bottom Wash: Dispense 001 - 999 (Increment: 1) Height

Standards

The instrument is designed in accordance with CSA 1010.1-92, UL 3101-1, EN61010-1 and EN61326.

Product group: Life science / Biotechnology

We can't find products matching the selection.