Dionex HPLC-System
Objektnummer | B00016722 |
---|---|
ID-number | 016722 |
Object name | Dionex HPLC-System |
Status | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, paymet by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Firma: Dionex
Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.
Sie geben nicht den Lieferumfang des Systems wieder.
Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.
Autosampler ASI-100 / ASI-100 T - Spezifikationen
Injektionsprinzip
Inline split-loop .
Probenzahl
Abhängig vom verwendeten Probenteller:
3 anal./ zylind . Segmente = 117 Gläschen à 1,8 ml+ 3 à 4 ml
3 anal./ kon . Segmente = 117 Gläschen à 1,1 ml + 3 à 4 ml
3 Mini-Segmente = 192 Gläschen à 1,2 ml + 3 à 4 ml
3 Semipräp . Segmente = 63 Gläschen à 4 ml + 3 à 4 ml
Probengläschen
Abhängig vom verwendeten Segmenttyp:
Typ 01 ( Analyt /Zylindrisch.): 1,8 ml Gläschen, zylindrisch, mit Crimpkappe
Typ 01 ( Analyt ./Konisch): 1,1 ml Gläschen, konisch, mit Crimpkappe
Typ 02 (Mini): 1,2 ml Gläschen, zylindrisch, mit Crimpkappe
Typ 03 ( Semipräp ): 4 ml Gläschen, zylindrisch, mit Schraubkappe
Alle Gläschen mit Septum Silikon/PTFE.
Injektionsvolumen
0,1 - 250 µl. mit Standardspritze und der entsprechenden Probenschleife in Schritten von 0,1µl
Verschleppung
< 0,1 %
Linearität
RSD < 0,5 %
Spülvolumen
Keines.
Probenverlust/Injektion
Keiner.
Min. Probenbedarf
5 µl
Reproduzierbarkeit
spezifizierter RSD < 0,3% bei 5µl
typischer RSD < 0,2% bei 5µl
typischer RSD < 1,0% bei 1µl
Mehrfachinjektionen
max. 9 pro Gläschen
Sicherheitseinrichtungen
Überlauf-/Leckmelder, automatische Segmenterkennung (wenn eingeschaltet), Tellererkennung/Überwachung des manuellen Eingriffs (wenn eingeschaltet), automatische Vialerkennung ( i.e . Überwachung bei Probenflaschenfehlbelegung), elektronischer Probennadelschutz, Zeitüberwachung sämtlicher mechanischer Bewegungsabläufe (Injektionsventil, Dosierspritze, usw.).
Temperaturregelung (ASI-100T)
im Bereich von 4 - 45°C
beim Kühlen: -18°C von der Umgebungstemperatur
beim Heizen: +35°C von der Umgebungstemperatur
Eingabe / Anzeige
LCD-Display, Tastatur mit allgemeinen Bedienelementen und Funktionstasten zur Direktsteuerung, LED-Anzeige (7 Segmente) zur Angabe der Retentionszeit, LED-Anzeige (7 Segmente) zur Angabe des Probenortes in Verbindung mit den drei LEDs (rot/grün/blau), 2 Leuchtdioden ( Load / Inject ) zum Status des Motorschaltventils, 2 Leuchtdioden (cool/ heat ) zum Temperaturstatus (ASI-100T).
Medienberührte Teile
Edelstahl (1.4571/316SS), PCTFE, PTFE, PEEK, Vespel .
Arbeitsdruck
Max. 340 bar.
Umgebungsbedingungen
10° bis 35°C, Luftfeuchtigkeit über Taupunkt.
Ein-/Ausgänge
2x seriell (RS232[A] und RS232[B]), MSV, Probenort , Digital I/O.
Netzspannung
115 V/60 Hz bzw. 230 V/50 Hz
Leistungsaufnahme
ASI-100: max. 126 VA;
ASI-100T: max. 250 VA
Druckluft
Keine.
Abmessungen
400 x 450 x 360 mm (B x T x H).
Gewicht
ASI-100: 17 kg;
ASI-100T: 21 kg
Max. Tragkraft bei Stapelung
25 kg.
Technische Angaben Stand März 2000, Änderungen vorbehalten!
HPLC-Pumpenserie P 580 - Technische Daten
Förderleistung
Analytische Version: 0,001 ml/min - 10 ml/min
Präparative Version: 0,005 ml/min - 100 ml/min (HPG)
Verdrängungsvolumen Arbeitskolben
Analytische Version: 79,2 µl pro Hub
Präparative Version: 477,8 µl. pro Hub
Kolbendurchmesser
Analytische Version: 3,175 mm
Präparative Version: 7,8 mm
Gradientenformung
Niederdruckgradient: quaternär
Hochdruckgradient: binär (bei Option Solvent-Selector aus 4 Eluenten )
Flußgradient kombinierbar mit Lösungsmittelgradient
Mischkammer
Standardvolumen: 0,2 ml, Sondergrößen erhältlich
Förderdruck
Analytische Version: max. 500 bar, kurzzeitig 1000 bar
Präparative Version: max. 150 bar
Sicherheitseinrichtungen
einstellbare Druckabschaltung (Minimum/Maximum),
Zeitüberwachung der Pumpenfunktion,
Feuchtesensoren
Eingabe/Anzeige
Tastatur (30 Tasten),
8-zeilige LCD-Anzeige (je 21 Zeichen),
11 LED-Anzeigen, lösungsmittelresistent.
Eingaben während eines aktiven Gradientenprogramms möglich.
Steuerung
Alle Funktionen steuerbar via RS-232-Schnittstelle,
permanente Statusübertragung.
Service-Erinnerung
Automatisch, je nach Belastung (Gesamtlast).
Ein-/Ausgänge
1 serieller Anschluss (RS-232)
1 MSV-6-Anschluß
3 Relaisausgänge
3 Relaiseingänge für Start, Stop , Hold,
1 Analogausgang für Systemdruck
Medienberührte Teile
Edelstahl 1.4571, Saphir, Rubin, Keramik, UHMW‑Polyethylen , PCTFE, PTFE, PEEK
Netzspannung
100V / 230V ±10%, 50/60 Hz
Leistungsaufnahme
Standby : 15W
Volllast: 70W
Abmessungen
413 x 170 x 362mm (B x H x T)
Gewicht
Je nach Ausführung 12,7 - 15,8 kg
Technische Angaben: Stand November 1998. Änderungen vorbehalten!
Fluoreszenz-Detektor RF-2000 - Spezifikationen
Lichtquelle
150W Xenon-Lampe
Lampengehäuse
Gehäusetyp Selbstozonisation
Art der Monochromatoren
Anregungs- und Emissions-Monochomatoren F/2.4 mit ion blazed holographischem , konkaven Beugungsgittern
Anzahl der Beugungsgitterstriche
900/mm
Wellenlängenbereich
200-650nm und nullter Ordnung
Bandbreite
15nm (Anregungs- u. Emissionsseite)
Wellenlängengenauigkeit
±2nm
Wellenlängenreproduzierbarkeit
±0.2nm
Wellenlängenscangeschwindigkeit
SUPER, FAST, MEDIUM und SLOW,
4 Schritte:
SUPER: ca. 3.000nm/min
FAST: ca. 600nm/min
MEDIUM: ca. 120nm/min
SLOW: ca. 24nm/min
Wellenlängenbewegungsgeschwindigkeit
Ca. 15.000nm/min
Detektor
Signalseite: Photomultiplier
Monitorseite: Photodiode
Messmethode
monochromatisches Licht überwacht durch Ratio-Kompensations-System.
Zeitkonstante
0.1, 0.5, 1.5 und 3s, 4 Schritte
Empfindlichkeit
HIGH, MED und LOW, 3 Schritte
(Empfindlichkeitsunterschied ca. 32fach)
Verstärkung ( Gain )
x1, x4, und x16, 3 Schritte
(ca. 1mal, 4mal, und 16mal)
Vergrößerung (Range)
1/∞ (0mV), x1, x1/2, x1/4, x1/8, x1/16, x1/32, x1/64, x1/128, x1/256
Ausgänge
Aufzeichnungsgerät: 1mV, 10mV
Integrator : 1V/FS
Contact- Signalausgang (EVENT OUT- Ausgang )
Eingänge
Contact-Signaleingang
( START-Eingang , STOP-Eingang )
Zelle
12µlQuartz-Strömungsmesszelie, Drucktoleranz 1.96MPa {20kgf/cm²} (Wert in { } ist Bezugswert)
Kommunikationsmöglichkeiten
Extern steuerbar von CHROMELEON via RS‑232C
Anzeige
Fluoreszenzaktivierte Displayröhre
Mess-Funktion
- Monitor-Funktion:
Autozero, Basislinien-Shift
- Ablaufprogramm-Funktion:
Bis 32 Schritte können programmiert werden.
- Wellenlängen-Scanning-Funktion :
Anregungs- und Emissionswellenlängen-Scanning
Differentialspektrum Plot-Output
Speicherkapazität
- Messbedingungen:
Speicherung von 1 Messbedingung
- Ablaufprogramm:
Speicherung von 1 Ablaufprogramm
- Spektrum:
Speicherung von 3 Spektren
(Beim Ausschalten wird kein Backup angelegt.)
Abmessungen
260 (Breite) x 520 (Tiefe) x 205 (Höhe) mm
Gewicht
Ca. 17kg
Stromversorgung
AC 100V±10%, 120V±10%, 220V ±10%,
230V±10%, 240V±10% 50, 60Hz
Stromverbrauch
350VA
Umgebungstemperatur
4 ~ 35°C
Umgebungsluftfeuchte
45 ~ 80% (ab 30°C sollte die rel. Luftfeuchte 70% oder niedriger sein).
S/N
Signal/Rauschverhältnis der Raman-Streuung von destilliertem Wasser ist 300 oder höher (wenn EX = 350nm und RESPONSE = 1.5s.)