DiaSorin Max 3000
Objektnummer | B00012248 |
---|---|
ID-number | 012248 |
Object name | DiaSorin Max 3000 |
Status | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
For deliveries to countries outside the EU, an additional fee of 70,00€ for export is charged. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by credit card, letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
The ETI-MAX 3000 is a fully automated microtiter plate analyzer performing the complete sample processing (sample pre-dilutions, sample and reagent dispensing, incubations, wash processes, plate transports) as well as the photometric measurement and evaluation. The Instrument is controlled via the Windows PC software ETI-MAX 3000. This software, which was specifically designed for this purpose, allows the user to process the pre-defined assays of DiaSorin as well as assays programmed by the user. The clear structure with intuitive user-guidance allows simple and quick operation of daily routine jobs as well as programming of user-specific assays.
Figure 1: Instrument modules
1 Tray for tip racks and dilution tubes
2 Patient samples and reagent unit
3 Tip eject station, pipettor rinsing position, pipettor station
4 Test plate compartment, plate transport unit
5 Drawer with wash unit and photometer
6 Position of incubators (below the tost plates), heated and for room temperature (dark)
7 Waste container for tips
8 Guide rail for pipettor (X and Y movement)
9 Pipettor (movement in Z-direction)
Technical Data
System Overview
Number of plates Up to 4 plates at once
Number of samples Max. 100 tubes, up to max. 0 16 mm, length up to 200 mm
Number of reagents Special racks for DiaSorin reagents
Dilution positions Positions for up to 160 dilution tubes
Number of tips Up to 5 tip racks for 300 µl or 1100 µl disposable tips
Loading Continuous loading of plates, samples, reagents and tips
Photometer
Spectral range 400 - 700 nm
Dynamic range -0.100 to 3.000 OD
Accuracy ± 0.005 or 2.5%
Linearity 0 - 2.000 OD ±1%
Detection Photodiode
Reading time < 15 seconds
Read modes OD and Kinetic mode
Filters Up to 8 positions
Pipetting System
Pipettor Liquid pipettor for disposable tips
Liquid level detection Standard
Min Max volumes 10 µl to 300 µl or
1000 pl with large tips Accuracy < 3 % at 10 µl
<0.5%at100pl
Precision < 3 % CV at 10 µl
< 2.5 % CV at 100 µl
Features Tip detection, mixing, multi-dispensing mode
Incubation
Capacity 4 independent chambers
Temperature range Minimum temperature = RT + 5
Maximum temperature = 50°C
Accuracy ± 1° C mean of plate
Uniformity ± 0.7° C across plate
Operatinq conditions Room temperature during Operation.
Washing
Capacity Max. 3 positions wash buffer + 1 distilled water
Wash head 1 x 8 with verify option
Dispense volume 200-2500 µl/well
Precision ± 5% CV at 300 µl
Residual volume < 2.5 µl in U-shaped bottom
< 4 µl in flat bottom
Fluid alarms Low reagent, waste full
Features Sweeps, soak, purge, top & bottom wash, variable pump speeds
Bar Code Barcode identification of samples, reagents and test plates possible
Software features
Operating system Windows 95
Interfaces ASTM interface
Flexible ASCII import of worklist sample ID's
Time Scheduling Schedules 4 plates with user options
Multiple assays per plate Up to 12 assays per plate
Export options Flexible ASCII export and report
Qualitative User definable result classes
Quantitative Linear to quadratic regression, sigmoidal, and many more
Language support Multiple languages possible
QA analysis Mean, SD, CV, Standard Error and Levey-Jennings
Power Supply
Universal a.c. input 100 - 260 Vac, 47 - 63 Hz
Typically max. 500 VA
Dimensions
W x D x H in mm <1060x660x835
Weight 90 kg