JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.
Usually, laboratory and analysis devices are very exigent system with a very own specifications and requirements. Therefore, the startup of a laboratory device often rises the question how to assemble, adjust and to launch it.
We would be pleased to take over the professional installation of your laboratory devices!Please contact us.
Benefit from the installation by us in more than one way:
24 months legal warranty
60 days Labexchange Fullguarantee
Certificate of operativeness
The Labexchange right of return
Optional installation of equipment for immediate and safe use of equipment
Questions regarding this device
If you buy this item used instead of new, you save as much CO2 as driving 1590 km with a gasoline car.
The legal warranty period for our devices is 24 months from delivery date.
All used instruments of Labexchange are subject to a technical inspection before delivery and will be supplied only, when they function perfectly well. The verification and functionability is documented by a service report of an independent service company. The Labexchange Fullguarantee is 60 days from delivery date. Malfunctions occurring within the warranty period will be corrected by us free of charge. (Valid for countries within the EU and CH)
Our certificate of operativeness ensures a technically perfect condition.
You are on the safe side with our used laboratory and analysis systems! For even more security during the purchase, we are granting the Labexchange right of return.
Return your laboratory or analysis system simply without explanation.
Our special terms and conditions are to be applied:Labexchange right of return(https://www.labexchange.com/fileadmin/user_upload/pdf/downloads/en/Rueckgaberecht_08_18_E.pdf)
On demand, we verify the option of an extension of warranty for your device. If possible, the period of warranty is 6 months for 10 % extra charge and 1 year for 20 % extra charge on the list price. (Valid for DE, AT, CH, FR, NL, BE, LU, GB and IR)
Play it safe! We are pleased to offer you the installation of your laboratory equipment. Our qualified technicians install the device on your desired date in the laboratory, so that you can work quickly and safely with your new laboratory equipment.
The installation of the equipment by Labexchange brings further advantages. You thereby obtain a guarantee extension to 6 months and you have also the right to the Labexchange Repurchase Guarantee. You receive sensible laboratory equipment and analytical systems as well as much of the available laboratory hoods, already incl. installation.
* Required Fields
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
For deliveries to countries outside the EU, an additional fee of 70,00€ for export is charged. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
We do not accept payment by credit card, letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country
Possible payment methods
Comment
DE, AT, CH
Payment by invoice, payment in advance
Payment by invoice is only possible for corporate clients.
NL, BE, LU
Payment by invoice is only possible for corporate clients
Other countries
Payment in advance
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
All articles are used articles, except an article is listed especially as a new device.
Status
Condition
Immediately available
Used
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article.
Published
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery.
New device
new
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply.
Modell: 200
Kommentar: Dokumente engl.
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representating the delivery volume. The exact delivery content you will find only in the offering text.
Series 200 LC-Pump
The series 200 LC Pump
The Perkin-Elmer Series 200 LC Pump can be used with virtually every LC system or application. The Series 200 LC Pump is upgradable from a single solvent (isocratic) pump, to mixing two solvents (binary) or to mixing four solvents (quaternary). In addition, each version is available in a biocompatable version. The Series 200 LC Pump provides you with the interchangeable technology so that you do not have to buy a new pump and learn new user interfaces every time your needs change.
Series 200 LC Pump Features and Benefits
Upgradable isocratic, binary, and quaternary versions as well as biocompatible versions for maximum flexibility.
Small, compact design (12 inches (30.5 cm) wide) saves valuable bench space.
Directory of up to 20 methods, 20 steps each with built-in method linking increases sample throughput.
Edit the active method or sequence in real-time with easy access function keys.
Large backlit liquid crystal display allows clear viewing of pump method and operating parameters at all times.
Unique function allows automatic shutdown of the pump method at final gradient method.
Graphic display of solvent profile on-screen shows real-time status of the gradient method.
Hold gradients or advance to the next step with a simple keystroke.
Solvent-resistant front panel with rounded ergonomic design for easier interaction with the keypad.
Tactile keyboard with unique "key click" so that you know your entry has been made.
Phone-type contact closure connections and finger tight plumbing Fittings make it simple to connect or disconnect your system.
Full method documentation including modification with method name, number, date and time stamp.
Visual access front-door panel allows quick plumbing inspection and easy servicing.
Maintenance log coded by the serial number of the pump, including pump and seal cycles.
Instrument log records history of operation for quick diagnosis and servicing to get you up and running quickly.
Extensive service diagnostics.
Pump module can be completely removed to lab bench for maintenance without having to unstack modules.
Flow Rate Range
0.01 to 10.0 mL/min (maximum pressure of 6 200 psi (420 bar) over the entire range
Flow Rate Increments
0.01 from 0 to 0.99 mL/min and 0.1 from 1.0 to 10.0 mL/min
Flow Precision
0.3% relative standard deviation (typically <0.1%) at 1 mL/min and 1 000 psi (70) bar with water as the mobile phase
Flow Accuracy
±1% of the setting at 1 mL/min and 1 000 psi (70 bar) with water as the mobile phase
Retention Time Reproducibility
<0.3% RSD (typically <0.1% RSD)
Pressure Range
0 to 6 200 psi or 0 to 420 bar from the entire flow-rate range
Pressure Limits
High and low limit user-settable to 10 psi or 1 bar increments
Solvent Compressibility
Keyboard settable flow calibration
Composition Range
0 to 100% solvent A - D (depending on your pump configuration)
Composition Settability
Settable to 0.1%
Composition Accuracy
±1.0% absolute from 3 to 97% at 5 mL/min
Composition Precision
Typically less than 0.2% variation
Gradient Curves
Linear, exponential 1 to 9.9 (positive and negative), or step (89 profile selections)
Linearity
Within ±1% from 10 to 90% at 5 mL/min
Program Steps
Step 0 plus up to 20 solvent program steps. Battery-backed storage of up to 20 methods plus one default method.
Step Time
0 to 999 min
Step Time Increments
0.1 min, 0 to 9.9 min; 1.0 min, 10 to 99 min
Programmed Timed Events
Two built-in independent momentary (two second) contact closures
Events/Methods
Maximum of 20
Event Increments
Dimensions (HxWxD)
14 cm x 30.5 cm x 43 cm
Weight
15.9 kg (35 lbs.)
Operating Conditions:
Environment
This instrument is designed for indoor use. It is not designed to operate in an explosive environment.
Ambient temperature
10 - 35°C
Ambient relative humidity
20 - 80% (without condensation)
Altitude
0 to 2000 meters
Installation Category
This instrument is able to withstand transient overvoltage according to Installation Category II as defined in IEC 1010-1.
Pollution Degree
This instrument will operate safely in environments that contain nonconductive foreign matter to Pollution Degree 2 in IEC 1010-1.
Storage Conditions:
-20 to 60°C (-4 to 140°F)
0 to 12,000 meters
AC Power Requirements:
AC power
70 Watts
AC voltage range
Grounded 100, 120, 220, 230, VAC (±10%)
Grounded 240 VAC (+6%/-10%)
Frequency
50/60 Hz (±1%)
Fuse rating characteristics:
100/120 VAC Single Fuse
1.6 A 3 AG Slow Blow, 250 V
220-240 VAC Single/Dual Fuse
0.8 A TT (5x20 mm), 250 V
Series 200 Autosampler
Figure 1-1. The Series 200 LC Autosampler.
The Perkin-Elmer Series 200 LC Autosampler is an advanced sample processor that can be used with virtually every liquid chromatography system or application. You configure the Autosampler and define all of your methods and operations using function keys on a keyboard located on the front panel of the instrument. A backlit Liquid Crystal Display (LCD) located directly above the keyboard shows both status information about the instrument and provides access to the screens you use to define methods and set configuration parameters. If you use the Perkin-Elmer Series 200 LC Pump, you will find that the Autosampler front panel is almost identical to the one on the Pump. In addition, the Pump and the Autosampler share many common operating features that will allow you to get your system up and running quickly. The Series 200 LC Autosampler provides you with interchangeable technology so that you do not have to buy a new Autosampler and learn new user interfaces every time your needs change.
Series 200 LC Autosampler Features and Benefits
Upgradable to biocompatible versions for maximum flexibility.
Small, compact design (12.5 inches (31.8 cm) wide) saves valuable bench space.
Directory of up to 20 methods.
Ability to link up to 10 methods together in a sequence.
Priority method which allows you to interrupt a method or sequence to run critical samples. The method or sequence resumes once the priority samples are analyzed.
Large backlit liquid crystal display allows clear viewing of autosampler method and operating parameters at all times.
Phone type contact closure connections and finger tight plumbing fittings make it simple to connect or disconnect your system.
Maintenance log coded by the serial number of the autosampler, including autosampler injection cycles.
Sampler module can be completely removed to lab bench for maintenance without having to unstack modules.
Injection range
Programmable from 0.1 - 1.0 µL at 0.1 µL increments, 1 µL to 2.5mL at 1µL increments
Replicate injections
1 - 99 from one vial
Precision
Typically <0.5% RSD of peak areas from 3 µL
Linerarity
>0.999
Minimum sample volume
1 µL in 7 µL
Sample syringe sizes
50, 100, 250, 500, 1000, 2500 µL
Sample waste
None (or user selectable)
Carryover
<0.02%
Flush cycles
User selectable, 1 - 9
Flush volume
0 - 2500 µL
Sample capacity
up to 225 vials with optional tray
Method parameters
Injection volume, sample draw speed, flush volume, flush cycle, 2 external contacts, start and stop time
Methods
Battery-backed storage of up to 20 methods including time programming. Editing of stored methods possible during runs.
Injection cycle time
2 - 3 samples per minute
Valve materials in contact with
sample
With Rheodyne 7725 for Analytical - stainless steel, Vespel, ceramic, PEEK
With Rheodyne 9725 for Bio Applications - PEEK, Tefzel,
ceramic
With Rheodyne 8125 for Microbore - stainless steel, Vespel, ceramic, PEEK
Display
7-line by 40-character backlit liquid crystal display
Communications
Integrated communications for derivatization and dilution options
Serial communications - standard
BCD interface - standard
5 relay outputs; 2 timed events, 2 inject, 1 start
10 - 30°C
10 - 80% (without condensation)
Peltier sample cooling tempera-
ture range
4 - 50°C, ± 2°C
Dimensions
Height: 400 mm (15.8 in)
Width: 318 mm (12.5 in)
Depth: 483 mm (19 in)
21 kg (461bs)
DAD-Detector LC-235C
The LC-135C and LC-235C multiple wavelength diode array LC detectors contain the following features:
Individual signal amplification of each pixel for a significantly improved signal-to-noise ratio.
Automatically determines peak purity by an absorbance index technique, for dependable data, even on trace levels of sample.
A dual beam design using two 35-element diode arrays provides excellent baseline stability at all wavelengths and all solvent systems.
History File reports (records of detector conditions for the run) are printed at the end of each run.
Automatically annotates the wavelength of maximum absorbance on each peak.
Biocompatible solvent path.
Instantaneous wavelength change.
All wavelengths monitored at the same time.
Computerized diagnostics.
In addition, the LC-235C Diode Array Detector contains the following features:
Produces instantaneous spectra.
Plots the spectra.
Overlays the spectra.
Normalizes the spectra.
Constructs an Absorbance Profile Map.
Contains the option of selectable modes of spectral acquisition.
Produces automated background correction of spectra.
Optical System Dual beam polychromator.
Source Deuterium lamp.
Spectral Bandwidth 5 to 175 nm.
Wavelength Range 195 to 365 nm.
Wavelength Accuracy < 1 nm.
Noise < 5 x 10 -5 AU P/P at 240 nm, and 15 nm bandwidth at peak width setting of 16 sec.
Drift < 2 x 10 -4 AU/hour at 240 nm, after warmup.
Absorbance Range -0.3 to 1.0 AU.
(on the optional plotter)
Linear Absorbance Range ≤1% deviation to 1.5 AU.
Flowcell Standard 8-µL volume, 10-mm pathlength, titanium. Dispersion: 20 µL, four sigma. Built-in holmium oxide filter.
Flowcell Pressure Rating 2200 psi
Analog Signal Outputs Two outputs, for wavelengths A and B,
(integrator) with software-selectable output voltage and filtering.
Number of Methods Nine user-programmable methods plus Method 0. Protected memory.
Nine steps per method.
Chromatograms and Spectra* Printer/plotter output.
Spectral Storage* 1000
Spectral Library* 21 in protected memory. Dimensions:
Height 28 cm (11 in.)
Width 36 cm (14 in.)
Depth 46 cm (18 in.)
Weight 25 kg (55 lb.)
Electrical Requirements 120/220 V, 50/60 Hz
Power Consumption 100 watts
Your Labexchange-Team will gladly help:
Christian Schmid Laboratory and analysis, Laboratory equipment, Life science
Hubert Sauter Spectroscopy, Chromatography
