Chiron Rapidlab 348
Objektnummer | B00009082 |
---|---|
ID-number | 009082 |
Object name | Chiron Rapidlab 348 |
Status | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, paymet by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.
Sie geben nicht den Lieferumfang des Systems wieder.
Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.
Einführung
Das Blutgas-Elektrolyt-Hkt-System 348 ist ein vollautomatischer Analysator zur Bestimmung von: pH, pCO 2 , PO 2 , Na + , K + , Ca ++ oder Cl - und Hkt aus Vollblut/Plasma/Serum.
Berechnet werden die Parameter: HCO 3 - (standard und aktuell), TCO 2 , Basenabweichung (in vitro und in vivo), O 2 SAT, O 2 Ct, AaO 2 ,a/A, cHb, Ca ++ (7.4) und mit dem Chlorid-Sensor die Anionenlücke.
Patienten-Dateneingaben:
Bediener-ID, Patienten-ID, Temperatur, cHb.und F I O 2 .
Das Probenvolumen beträgt minimal 40 µl - normale Probenvorlage 95µl. Die Probenaufnahme hat 2 Aufnahmepositionen für die Probenvorlage:
1. Ampulle (Qualitätskontrolle), 2. Kapillare oder Spritze.
Die Probe wird vom System auf Volumen sowie auf Luftblasen geprüft und automatisch positioniert. Bei zu geringer Probenmenge wird vom System automatisch eine manuelle Sukzessivmessung angeboten.
Die Software ist nach dem Prinzip der Bedienerführung aufgebaut und ermöglicht somit bei einfachster Handhabung ein Optimum an Flexibilität und Sicherheit.
Die beleuchtete, transparente Meßkammer gibt zusätzliche Sicherheit bei der Probeneingabe, der automatischen Probenpositionierung und dient der Kontrolle der exakten Meßkammerreinigung.
Alle Reagenzien und Kalibriergase sind im System integriert. Optisch können die schwach bläulichen Reagenzien durch die transparenten Reagenzbehälter auf ihre Füllhöhe überprüft werden. Eingebaute Drucksensoren zeigen frühzeitig einen Restdruck der Kal/Slope-Kalibriergaskartuschen an.
Der Datenspeicher erlaubt den Zugriff auf die letzten 30 Messungen. Die Vermessung der Qualitätskontrolle wird je Level gespeichert (30 Messungen). Die Statistik wird für 4 Level zuzüglich Level A+B für Hkt ausgedruckt. Ebenso steht ein Datenspeicher zur Verfügung, der alle nicht erfolgreichen Kalibrationen der letzten 24 Stunden speichert.
Der Anschluß an eine Datenverarbeitung ist über 2 Data-Ports mit einer Schnittstellenkonfiguration von LIS 1 bis LIS 3 möglich. Eine Schnittstellenbeschreibung (Interface Manual Artikel-Nr.: 105 293) wird von Chiron Diagnostics GmbH bei Bedarf zur Verfügung gestellt.
Systemangaben
Abmessungen/Gewicht:
Breite: 386 mm
Tiefe: 380 mm
Höhe: 371 mm
Gewicht: 13.1 kg (mit Reagenzien und Gaskartuschen-Kit)
Netzanschlußwerte:
100 V (85 bis 110 V)
120 V (102 bis 132 V)
220 V (187 bis 242 V) 50/60 Hz
240 V (204 bis 264 V)
Stromaufnahme:
80 VA
Hinweis: Für 230 V Netzversorgung die Einstellung 240 V wählen.
Umgebungstemperatur: 15-32°C
Relative Luftfeuchtigkeit: 5 - 85%, nicht kondensierend
Lichteinfall: 8000 Lux, maximal
Luftdruck: 400 - 825 mmHg
Probenvolumen: 95 µl Spritze/Kapillare
40µl Sukzessiv-Messung
Meßzeit: ≤ 60 sek.
Sicherheitsprüfungen: TÜV/GS. IEC 601, IEC Type B (Klasse 1), CSA, UL, CE
Das System nicht direktem Sonnenlicht aussetzen.
Zur ausreichenden Belüftung einen Abstand von ca. 10 cm zwischen System-Rückwand und einer anderen Fläche einhalten.
Systemspezifikationen
Gemessene Parameter/Meßbereiche
pH 6.001 - 8.000 (10.0 - 997.7 nmol/I H + )
pCO 2 5.0 - 250.0 mmHg (0.67 - 33.33 kPa)
pO 2 0.0 - 749.0 mmHg (0.00 - 99.86 kPa)
Na+ 80 - 200 mmol/I
K+ 0.50 - 9.99 mmol/I
Ca++ 0.20 - 5.00 mmol/I
CI- 40 - 160 mmol/I
Hkt 12-75%
Barometer 400 - 825 mmHg (53.3-110.0 kPa)
Berechnete Parameter
HCO 3 - (akt. und std.) 0.0 - 60.0 mmol/I
BE (ecf und B) ± 29.9 mmol/I
ctCO 2 0.0 - 60.0 mmol/I
O 2 SAT 0.0-100.0%
O 2 CT 0.0 - 40.0 ml/dl
pO 2 (A-a) 0.0 - 749.0 mmHg (0.00-99.86 kPa)
pO 2 (a/A) 0.00-1.00
An Gap ± 60.0 mmol/I
CHb (berechnet) 2.0 - 25.0 g/dl (20-250 g/L, 1.2-15.5 mmol/I)
Ca ++ (7.4 pH) 0.20 - 5.00 mmol/I
pO 2 /F I O 2 0.00-5.00