CEJ 510-4
Objektnummer | B00012750 |
---|---|
ID-number | 012750 |
Object name | CEJ 510-4 |
Status | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, paymet by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representating the delivery volume. The exact delivery content you will find only in the offering text.
MIKROKATOR
The Mikrokator is an instrument for measuring differences
in length. The Mikrokator principle greatly magnifies any
deviation in size so that even small deviations produce
large deflections of the pointer over the scale. The transference
of movement from the measuring tip to the pointer
is mechanical, completely frictionless and free from backlash.
A wide range of models are available, which
gives graduations varying between .0001
(.005 mm) and .00002 (.0001 mm).
The unique Twisted Strip principle on
which all Mikrokators are based, provides
many features which are not available on
any other measure instrument.
C E J O H A N S S O N E N G I N E E R I N G A B A C O M P A N Y I N T H E H E X A G
STANDARD MIKROKATORS
CE Johansson Mikrokators are available in both metric and imperial type.
MIKROKATOR METRIC TYPE |
|
|
|
||
No. |
Shank |
Scale |
Scale |
Mean |
Variation of |
|
Ø |
Range |
Division |
measuring |
measuring |
|
mm |
m |
m |
pressure |
pressure |
|
|
|
|
approx.gr |
approx. gr |
500A-2 |
8 |
400 |
5 |
100 |
70 |
500A-3 |
8 |
200 |
2 |
75 |
40 |
500A-4 |
8 |
100 |
1 |
75 |
35 |
500A-5 |
8 |
50 |
0,5 |
75 |
25 |
500A-7 |
8 |
30 |
0,2 |
75 |
25 |
509-4 |
30 |
200 |
1 |
250 |
100 |
509-7 |
30 |
40 |
0,2 |
250 |
55 |
510-3 |
30 |
100 |
2 |
250 |
45 |
510-4 |
30 |
60 |
1 |
250 |
35 |
510-5 |
30 |
36 |
0,5 |
250 |
30 |
510-7 |
30 |
20 |
0,2 |
250 |
30 |
510-9 |
30 |
6 |
0,1 |
250 |
30 |
MIKROKATOR IMPERIAL TYPE |
|
|
|
||
No. |
Shank |
Scale |
Scale |
Mean |
Variation of |
|
Ø |
Range |
Division |
measuring |
measuring |
|
mm |
inch |
inch |
pressure |
pressure |
|
|
|
|
approx.gr |
approx. gr |
500EA-2 |
8 |
,0160 |
,0002 |
100 |
70 |
500EA-3 |
8 |
,0080 |
,0001 |
75 |
40 |
500EA-4 |
8 |
,0040 |
,00005 |
75 |
35 |
500EA-5 |
8 |
,0020 |
,00002 |
75 |
25 |
500EA-6 |
8 |
,0012 |
,00001 |
75 |
25 |
509E-4 |
30 |
,0100 |
,0005 |
250 |
100 |
509E-55 |
30 |
,0020 |
,0002 |
250 |
55 |
510E-2 |
30 |
,0060 |
,0001 |
250 |
80 |
510E-4 |
30 |
,0024 |
,00005 |
250 |
35 |
510E-5 |
30 |
,0014 |
,00002 |
250 |
30 |
510E-6 |
30 |
,0008 |
,00001 |
250 |
30 |
510E-8 |
30 |
,0002 |
,000002 |
250 |
30 |
MIKROKATOR METRIC TYPE |
CEJ ART . NO |
500A-2 |
8300-02102 |
500A-3 |
8300-02103 |
500A-4 |
8300-02104 |
500A-5 |
8300-02105 |
500A-7 |
8300-02107 |
509-4 |
8307-05004 |
509-7 |
8307-05007 |
510-3 |
8308-05003 |
510-4 |
8308-05004 |
510-5 |
8308-05005 |
510-7 |
8308-05007 |
510-9 |
8308-05109 |
MIKROKATOR IMPERIAL TYPE |
CEJ ART . NO |
500EA-2 |
8300-52002 |
500EA-3 |
8300-52003 |
500EA-4 |
8300-52004 |
500EA-5 |
8300-52105 |
500EA-6 |
8300-52106 |
509E-4 |
8307-55004 |
509E-55 |
8307-55005 |
510E-2 |
8308-55002 |
510E-4 |
8308-55004 |
510E-5 |
8308-55005 |
510E-6 |
8308-55006 |
510E-8 |
8308-55008 |
MIKROKATORS SPECIAL FEATURES
To obtain the best possible measuring results it is often desirable to use instruments
having special features. The Mikrokator can be provided with a wide variety of special
arrangements indicated by the prefix letters listed below. These prefix letters should be
used when ordering.
F Overtravel
1.0mm on 500
0.5mm on 510 and 509
Standard on all 500 and 510-9
Supplied as optional extra on all other Mikrokators
Z Zero-Adjusting Screw
Standard on all 500
Supplied as optional extra on all 509 and 510
P Adjustable measuring pressure 0 1200g
Supplied as optional extra on all 509 and 510
7V Adjustable measuring pressure 30g 1200g
Only available for Mikrokator 509-7, 509E-55 and 510-4
to 510-9 with visible scale on shaft.
C 3/8 Shaft
Only available for Mikrokator 500(E) serie
When measurements are being taken on fragile materials a low
measuring pressure is essential to avoid damage or indentations.
The above special features has been developed for this purpose.
MIKROKATOR ACCESSORIES
J O H A N S S O N A B A C O M P A N Y I N T H E H E X A G O N G R O U P
The Mikrokator is an instrument for measuring
differences in length. The Mikrokator principle
greatly magnifies any deviation in size so that
even small deviations produce large deflections
of the pointer over the scale. The transference
of movement from the measuring tip to the
pointer is mechanical, completely frictionless
and free from backlash.
MIKROKATOR STANDS
High Precision Comparator Stands, extremely robust to provide required stability.
Rapid and convenient fine adjustment with extreme sensitivity. Chrome-plated and
ground column. Base of cast iron.
For Mikrokator 509 and 510
With measuring arm suitable for instruments
with shank diameter 30 mm.
Supplied with measuring table 8321-01013.
Max. measuring height between table
and measuring tip 180 mm.
Max. measuring depth 80 mm.
Weight 11 kg.
B318-0 1003
For Mikrokator 500
With measuring arm suitable for instruments
with shank diameter 8 mm.
Supplied with measuring table 8321-01013.
Max. measuring height between table
and measuring tip 190 mm.
Max. measuring depth 80 mm.
Weight 11 kg.
B 318-0 1004
MIKROKATOR ACCESSORIES
Height Adjustment Adapter
For quick and accurate height adjustments.
The adapter also prevents the measuring
arm from turning round the column during
the height taverse which is very important
during differential measurements. The adapter
reduces the actual measuring height of the
stand by approximately 25 mm.
Lift arm for Mikrokator 509 and 510
Mount on the Mikrokator shaft to lift the
measuring tip
Adjustable holder
For tables 8321-01013 och 8321-01003.
8321-01015
Adjustable Measuring Support
To be attached to the column of the stand to
provide a backstop, e.g. when measuring
cylindrical workpieces. Dimensions of support
plate 80x16 mm. Adjustment range 0-50 mm
behind the centre line of the measuring tip
.
Measuring Table 35x90x30mm
Provided with two measuring surfaces. One surface
is plain and the other is grooved with bars 0,6 mm
wide. Flatness of measuring surfaces 0,002 mm.
Material steel, hardened and stress relieved. Black
oxidised finish with lapped measuring surfaces.
Measuring Table 90x90x30mm
Provided with one measuring surface grooved
with bars 0,6 mm wide. Flatness of measuring
surfaces 0,002 mm. Material steel, hardened
and stress relieved. Black oxidised finish with
lapped measuring surfaces.
MIKROKATOR MEASURING TIPS
For Mikrokator 500
For Mikrokator 509 and 510