Bleymehl Flora MFII 812D

ID-number: 017076

Status: Archived Product

Shipping:

Description:

Karl Bleymehl Laminarflow-Zone Flora MFII 812D. 230 V. 50 Hz. 400 W. 750 m³/h. 0,45 m/s. Outer dimension: 81x66x78 cm. With rack on rolls. Ceiling suspension. Vertical stream of air. Total height: 285 cm.

siehe Storeview

Skip to the end of the images gallery

Skip to the beginning of the images gallery

More Information
Objektnummer	B00017076
ID-number	017076
Object name	Bleymehl Flora MFII 812D
Status	Archiv

Status, terms of delivery and payment

Verification of devices

The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.

Dispatch time

The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.

As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.

Shipping methods

Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.

Delivery information

Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.

The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.

Terms of payment

We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.

Country	Possible payment methods	Comment
DE, AT, CH	Payment by invoice, payment in advance, paymet by credit card	Payment by invoice is only possible for corporate clients.
NL, BE, LU	Payment by invoice, payment in advance, payment by credit card	Payment by invoice is only possible for corporate clients
Other countries	Payment in advance, payment by credit card

Our General Terms of Sale, Delivery and Payment are valid and are available for download here.

The goods are offered subject to prior sale.

Definition of status

All articles are used articles, except an article is listed especially as a new device.

Status	Condition	Comment
Immediately available	Used	The article is fully functional and in impeccable condition. It can be shipped immediately.
In stock	Used	The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article.
Published	Used	The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery.
New device	new	The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply.
Labprocure	Used	Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen.

Firma: Bleymehl

Modell: Flora MFII 812D

Kommentar: Dokumente deut.

Nachfolgende Abbildungen und Beschreibungen sind modellbezogen und aus Prospekten entnommen.

Sie geben nicht den Lieferumfang des Systems wieder.

Den exakten Lieferumfang entnehmen Sie bitte aus dem Angebotstext.

Anwendung

Laminar-Flow Strömung zum Schutz des Produktes vor schädlichen Einflüssen aus der Umgebung und dem Arbeitsprozess.

Die Luftqualität entspricht:

● der ISO 14644-1 Kl. 5

● dem US-Federal Standard 209e, Kl. 100

● Das GMP-gerechte Arbeiten wird gewährleistet.

Funktionsbeschreibung

Laminar-Flow ist eine sanfte Strömung hochrein gefilterter Luft mit gleichmässiger Geschwindigkeit.

Diese Luft wird ganzflächig durch den REINEN Arbeitsraum geleitet. Sie verdrängt die unreine Raumluft und führt alle Verunreinigungen von dem Arbeitsprozess oder Menschen zuverlässig ab.

Raumluft wird über ein Vorfilter von einem geräuscharmen Radialventilator angesaugt. Die gesamte Luft wird in die Verteilerkammer gefördert und durch HEPA-Filter (High Efficiency Particulate Air-Filter) gepresst. Der Kreislauf beginnt erneut.

● Der Einbau von Luftkühlern auf der Saugseite ist möglich.

4 Die Luftbilanz Ihrer Lüftungsanlage wird durch dieses Gerät nicht beeinflusst.

Beschreibung der Bauteile

Laminar-Flow-Modul

Material Seewasserbeständiges Aluminium (AlMg3)

Innen schalldämmend ausgekleidet

Farbe RAL 1015 (hellelfenbein)

Vorfilter

Kl. G4 DIN EN 779

Material Kunstfaserwirrvlies

Filterdaten Endwiderstand des erschöpften Filters ca. 100 Pa

HEPA-Filter-Schutzgitter

Material Seewasserbeständiges Aluminium (AlMg3)

Ausführung Rundlochung ∅ 1,75 mm in versetzten Reihen,

grosse offene Siebfläche 48%, allseitig ungelochter Rand Oberfläche Glatt, matt-eloxiert (E6EV1) und reflektionsfrei

Zum Schutz der Filter gegen unbeabsichtigte Beschädigung.

HEPA-Filter HOSCH-Filter HOchleistungs-SCHwebstoff

Kl. H14 DIN EN 1822-1

Verwendungskategorie K1/K2, Ausführung gemäss EN 13091

Filter Glasfaserwirrvlies mit Aluminiumseparatoren

Filterdaten Anfangswiderstand des neuen Filters ca. 100 Pa

Endwiderstand des erschöpften Filters ca. 420 Pa Abscheidegrad > 99,999% für Partikel der Grösse ∅ 0,3 µm

Filterendkontrolle im eingebauten Zustand mit dem Aerosolbelastungs- (DOP) Test

HEPA-Filter Befestigung

Material Stahl galvanisch verzinkt

Ausführung Rahmenkonstruktion aus Vierkantrohr

Befestigung Selbstnachstellende Federspannelemente mit Tellerfedern

Anpressdruck 240 kPa (2,35 kg/cm2) auf die Dichtung des Filters

Der Austausch der HEPA-Filter ist einfach durchzuführen.

Ventilator

Ausführung Doppelseitig saugende Radialgebläse mit Aussenläufermotor

Befestigung Gebläse und Motor sind in Gummi schwingungsisoliert gelagert

Wuchtgüte Motor mit Trommellaufrad sind ausgewuchtet in Güteklasse Q 2,5

Gebläse, Motor und Lager benötigen keine Wartung.

Technische Daten

Laminar-Flow Zone

Aseptischer Produktschutz

ISO 14644-1 Kl. 5, US-Fed. Stand, 209 Kl.100

Serie FLORA-DF II-812

Deckenabhängung

H1 = 750 mm B1 = 812 mm T1 = 660 mm

H2 = 2200 mm B2 = 772 mm T2 = 620 mm

H1 = 850 mm

Volumenstrom bei 0,45 m/s el. Anschluss 230 V; 50 Hz

Gesamtluft 750 m₃ /h el. Leistung ca. 0,4 kW

Geräusch ca. 57 dB(A) Gerätegewicht ca. 70 kg

Product group: Safety workbenches

We can't find products matching the selection.