Bischoff HPLC-Pumpe
| Objektnummer | B00017081 |
|---|---|
| ID-number | 017081 |
| Object name | Bischoff HPLC-Pumpe |
| Status | Stock unit |
Product group: HPLC-Pumps (isocratic)
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
|
Country |
Possible payment methods |
Comment |
|
DE, AT, CH |
Payment by invoice, payment in advance, paymet by credit card |
Payment by invoice is only possible for corporate clients. |
|
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
|
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
|
Status |
Condition |
Comment |
|
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
| In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
|
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
|
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
|
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
manufacturer: Bischoff
model: HPLC
annotation: Dokumente engl.
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
Specifications
low rate range Pump head P-analytisch 0.01 - 4.99 mL/min
Flow rate accuracy at 20 - 80 % FS ≤_ 3 %
Flow reprodueibility ≤ 0.5 %
Pressure range Pump head M 0 - 60 MPa
Pump head A 0 - 50 MPa
Pump head P 0 - 15 MPa
Pump head volumes
(analytical)
- main piston 54 µL
- priming piston 20 µL
Pump displacement
volumes
- main piston 45 µL
- priming piston 14 µL
Length of stroke
- main piston 5.6 mm
- priming piston 1.8 mm
Residual pressure compensated by setting the ≤ 3 %
pulsation proper compressibility
at 2 mL/min and 20 MPa
into a 125 mm column
Pressure measurement a) volume of the pressure 50 µL
transducer
b) accuracy 3 %
c) resolution of the display 0.1 MPa
d) recorder Output 1 mV/MPa
Pressure shut down adjustable
a) maximum switch-off 0 to FS < 20 ms
time 0.1 to FS
b) minimum switch-off time 3 cycles
alter initial delay of 2 min
not effective at 0.0 Mpa
Compressibility adjustable
Correction mode manually
Purge valve Standard
Purge key runs maximum flow of installed head
Display alternatively a) flow 6 digit LED display
b) pressure wich sign and pump head
c) compressibility type other than Standard
Pump head identification automatically
Input by 6 push button keys
External control by contact closures a) stop pump
or active input b) reduce flow
by RS 232 or current loop all functions
Auxiliary Outputs a) suction phase
b) pump stop
Power requirements 110/220 V ± 10%
50/60 Hz
50 VA
Temperature range +15°C up to +30°C
Dimensions 381 x 255 x 133 mm
Weight 8.7 kg
Your Labexchange-Team will gladly help:
Christian Schmid
Laboratory and analysis, Laboratory equipment, Life science
Hubert Sauter
Spectroscopy, Chromatography
