Biotest RCS plus
Objektnummer | B00012936 |
---|---|
ID-number | 012936 |
Object name | Biotest RCS plus |
Status | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance, paymet by credit card |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
The following illustrations and descriptions are referring to the instrument model and are drawn from brochures. They are not representing the delivery volume. The exact delivery content you will find only in the offering text.
Application
The Biotest RCS Plus Air Sampler is used to investigate the microbiological quality of ambient air, the functionality of air treatment equipment, and the effectiveness of decontamination measures. lt is used routinely in places where specified airborne microbial counts as prescribed by law or through individual standards may not be exceeded.
The RCS Plus Air Sampler provides a simple means of testing concentrations of airborne microbes. The RCS Plus Air Sampler has proved its value particularly in laminar flow areas and in sterile areas of industrial and hospital environments , where low concentrations of airborne microbes are to be expected. However, testing for airborne microbial counts can also be carried out in offices and at the workplace, i.e. making it possible to investigate the question of »sick building syndrome«.
Principles of Operation and Construction
The Biotest RCS Plus Air Sampler operates on the impaction principle. lt facilitates the quantitative separation of airborne microorganisms from sample volumes ranging from 10 to 1000 liters (1m 3 ).
The air stream enters the rotor at the front of the Instrument, is set into rotation by the movement of the fan, and separates microbes contained in the air onto the agar strip through centrifugal force. To prevent the occurrence of turbulence in the air inlet channel, the air outlet passage is directed to the rear, parallel with the Instrument. The air flows at a constant rate which is approximately 50l/min at a rotor speed of 6100 rpm.The Instrument can be calibrated to ensure that the sampling volume remains exact.
The Instrument is constructed with special attention to ergonomics. lt operates independently of a mains power supply using a 7.2 volt rechargeable nickel cadmium battery. The battery is easy to change through a door on the battery compartment at the rear of the unit.
Built-in electronic circuitry controls the speed and the running time of the motor and simultaneously monitors the battery voltage. Sampling volumes of Io, 20, 50,100, 200, 500 and 3000 liters have been permanently programmed into the Instrument. In addition, it is possible to enter three individually chosen sampling volumes of up to a maximum of 1999 liters. Operation of the Instrument is via a keyboard with integrated display which is situated within easy reach directly in front of the carrying handle, allowing it to be operated with one hand. An infra-red sensor is incorporated into the electronics which permits remote control of the Instrument. The Instrument provides various memory functions, giving the user a wide variety of important control and security functions.
The rotor, which contains the agar strip, is driven via a magnetic coupling flange. This enables it to be simply removed from the Instrument. For safety reasons, a stainless steel protection cap is situated over the rotor, without which the instrument cannot function.
The Instrument can be operated in a vertical or a horizontal position. For sampling in areas difficult to access, the instrument can be attached to a tripod by means of a threaded attachment in the base of the housing.
Technical Data
Sampling principle:
The Biotest RCS Plus Air Sampler operates on the Principle of impaction whereby the air
stream enters the rotor at the front of the instrument and the airborne microbes are separated onto the agar strip by centrifugal force.
Measurement range:
1-1999 liters (recommended measurement range 10-1000 liters)
Airflow-rate:
approx. 50 l/min
Instrument precision:
± 5%
Sample volume:
-7 volumes in memory in ascending order of 10, 20, 50,100, 200, 500 and 1000 liters 3 positions in memory, individual selectable from 1 to 1999 Iiters. The accuracy of sampling volume is achieved through calibration.
Rotor speed:
approx. 6100 rpm
Maximum allowable axial forte on rotor shaft:
30 Newtons
Power supply:
Rapid charging 7,2 V nickel cadmium battery (charging time 1 hour)
Automatic power-off:
The Instrument switches itself off automatically alter 8 minutes
Materials:
Housing : polycarbonate; resistant to 70% ethanol
Rotor: anodized aluminum; autoclavable
Protection cap: stainless steel; ; autoclavable
Weight:
approx. 1500 g with battery pack (3.3 Ibs)
Miscellaneous:
Operation via keyboard Panel with integrated display
Thread connection for tripod
lnfra-red remote control sensor
Can be calibrated using the Biotest Anemometer (traceable to PTB, Physikalisch Technische Bundesanstalt)
Errors indicated via display and acoustic signal
Memory function for residual sampling volume and last sampling volume processed