BioRad Powerpac 200
| Objektnummer | B00009714 |
|---|---|
| ID-number | 009714 |
| Object name | BioRad Powerpac 200 |
| Status | Stock unit |
Product group: Electrophoresis
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
|
Country |
Possible payment methods |
Comment |
|
DE, AT, CH |
Payment by invoice, payment in advance, paymet by credit card |
Payment by invoice is only possible for corporate clients. |
|
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
|
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
|
Status |
Condition |
Comment |
|
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
| In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
|
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
|
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
|
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
PowerPac power supplies provide constant voltage or constant current to instruments used in electrophoresis and blotting. The PowerPacs are capable of the following adjustable outputs:
PowerPac 200
Voltage output: Adjustable from 5 to 200 volts in increments of 1 volt.
Current output: Adjustable from 0.01 to 2.00 Amps (2000 mA) in increments of 0.01 A.
Power output: 200 watts (maximum)
PowerPac 300
Voltage output: Adjustable from 10 to 300 volts in increments of 1 volt.
Current output: Adjustable from 4 to 400 milliAmps (mA) in increments of 1 mA.
Power output: 75 watts (maximum)
Up to four electrophoresis cells can be connected in parallel to the power supply.
The PowerPacs are programmed with default limit values for voltage and current. These are the values which are available when the unit first is turned on. These values may be changed for each application.
The power supplies operate at the values specified for the constant parameter. However, to prevent damage to your electrophoresis cell, both PowerPacs provide automatic crossover to constant current or constant voltage, depending on which set value is first reached. When the set limit of the non-constant parameter is reached, and the power capability of the unit is not exceeded, the power supply will switch, making the non-constant parameter the new constant parameter.
The PowerPac 200 and PowerPac 300 power supplies offer a number of features, including the following:
Constant voltage or constant current operation with automatic crossover.
Timer control.
Viewing angle adjustment.
3-digit LED display.
Stackable case.
Automatic detection of no-load conditions and rapid changes in resistance.
Automatic completion of a run interrupted by a power failure, when user enabled.
Ground leak detection (PowerPac 200 only).
Specifications
Note: All specifications subject to change without notice.
Input Power
100/120 V model: 90 - 132 VAC, 47 Hz - 63 Hz
220/240 V model: 198 - 264 VAC, 47 Hz - 63 Hz
Fuses
100/120 V units: PowerPac 200: 5 A, 125 V, 5mm x 20mm, Type T
PowerPac 300: 2.5 A, 125 V, 5mm x 20mm, Type T
220/240 V units: PowerPac 200: 2.5 A, 250 V, 5mm x 20mm, Type T
PowerPac 300: 2.5 A, 250 V, 5mm x 20 mm, Type T
Input Power Cord: 3-wire; grounded
Output (Programmable) Constant voltage, constant current; with automatic crossover Voltage: PowerPac 200: 5 V to 200 V, fully adjustable in 1 V steps PowerPac 300: 10 V to 300 V, fully adjustable in 1 V steps Current: PowerPac 200: 0.01 A to 2.00 A, fully adjustable in .01 A steps PowerPac 300: 5 mA to 400 mA, fully adjustable in 1 mA steps Power (max.): PowerPac 200: 200 W
PowerPac 300: 75 W
Terminals: 4-pair recessed female banana jacks, floating in parallel
Timer Control: 001 to 999 minutes, fully adjustable
Resolution
Ripple: PowerPac 200: ±1 % @ 200 V and 200 W
PowerPac 300: ±1 % @ 300 V and 75 W
Line Regulation: PowerPac 200: ±0.5% @ 200 V and 180 W
from 90 - 132 V AC or 198 - 264 V AC
PowerPac 300: ±1 % @ 300 V and 75. W
from 90 - 132 V AC or 198 - 264 V AC
Load Regulation: PowerPac 200: ±1 % @ 200 V for a 50% change in output load PowerPac 300: ±1 % @ 300 V for a 50% change in output load Drift: PowerPac 200: ±0.5% after 30 min. warm up at 200 V and 180 W PowerPac 300: ±1 % after 30 min. warm up at 300 V and 75 W
Noise: PowerPac 200: 30 dBA
PowerPac 300: 27 dBA
Readout Stability
Volts: PowerPac 200: ±1 V
PowerPac 300: ±1V
Current: PowerPac 200: ±10 mA
PowerPac 300: ±1 mA
Safety Features
No load detection: Indicated by error message on LED display
Sudden load change
detection: Indicated by error message on LED display
Overload/short
circuit protection: Indicated by error message on LED display; fuse an both hot and neutral
Ground Leak Detection: Indicated by error message on LED display if the ground current is (PowerPac 200 only) greater than 500 pA.
Auto power up
after power failure: User-selectable, setup values maintained
Safety
Compliance: I.E.C. 1010
EMI Conforms to CE standards for Emissions and Immunity;
tested only at 220 V. See Declaration of Conformity for - details. . TUV EMC certification.
Display Functions: 3-digit LED displays voltage, current, time
Function Modes: Constant voltage, constant current, timer
User-selectable automatic power-up after power failure
Environmental
Operating Temp.: 0 - 40°C
Humidity: 0 - 95%, in the absence of condensation
Dimensions: 29 (L) x 21 (W) x 8 (H) cm.
Unit is stackable
Weight: PowerPac 200: 2.4 kg
PowerPac 300: 1.8 kg
