Analytik Jena SpeedCycler 2
Objektnummer | B00020426 |
---|---|
ID-number | 020426 |
Object name | Analytik Jena SpeedCycler 2 |
Status | Archiv |
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
For deliveries to countries outside the EU, an additional fee of 70,00€ for export is charged. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by credit card, letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
Country |
Possible payment methods |
Comment |
DE, AT, CH |
Payment by invoice, payment in advance |
Payment by invoice is only possible for corporate clients. |
NL, BE, LU |
Payment by invoice, payment in advance |
Payment by invoice is only possible for corporate clients |
Other countries |
Payment in advance |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
Status |
Condition |
Comment |
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
model: SpeedCycler 2
annotation : Dokumente engl .
The following illustrations and descriptions refer to the instrument model and are drawn from brochures. They do not represent the scope of delivery. Please refer to the text of the offer for the exact scope of delivery.
SpeedCycler2
High performance thermal cycler
- rapidPCR in less than 8 minutes
- Low sample consumption starting at 2.0 µl
- Small footprint PCR system with full flexibility
Ultra high performance thermal cycler
With the SpeedCycler 2 Analytik Jena has launched the second generation of the original SpeedCycler technology.
The device is once more faster compared to its predecessor. Extraordinary high heating and cooling rates of up to 15 °C/sec and 10 °C/sec, respectively, are realized.
That makes the SpeedCycler 2 to the fastest available thermal cycler worldwide.
Features
- rapid PCR with heating and cooling rates of up to 15 °C/sec and up to 10 °C/sec
- Outstanding heat transfer through SAC-technology
- rapid PCR in less than 8 minutes
- Reduced primer mismatching
A smaller footprint, the modular design, the external control panel and, last but not least, the ultra high performance distinguishes the SpeedCycler 2 from his larger brother AlphaSC ®. The system is ideal either as space saving single thermal cycler or as a modular system expandable to full cycler networks. It grows with the requirements of its user. Starting with just a basis unit, which can be controlled via PC or the new external user-interface HID-Pro 320, the cycler can be expanded with additional basis units to build up complete cycler networks.
Features
- Control via the portable user-interface HID-Pro 320
- Small footprint satellite system, expendable to cycler networks
For the SpeedCycler 2 various, interchangeable blocks are available. Two different types, the Standard-Profile-Rapid (SPR) and the Low-Profile-Rapid (LPR) blocks, are applicable to the device system. Therefore standard PCR consumables can be used as well as low-profile (LP) PCR consumables.
Features
- Four different blocks available (SPR: 48 SPR Block, 96 SPR Block | LPR: 36 LPR Block, 96 LPR Block)
- Solid gold-coated, sterling-silver sample block
- Flexible use of different consumables
- Optimized for low reagent consumption and reduced running costs
The SpeedCycler 2 has been optimized for very small sample consumption and the use of inexpensive standard PCR reagents. Costly and often limiting chemical additives can be consciously avoided and are not necessary to perform a rapid PCR amplification. Furthermore, the higher cooling rates result in a significantly improved specificity of the PCR products compared to standard thermal cyclers.
External user-interface HID-Pro 320
The new portable user-interface HID-Pro 320 makes a PC superfluous and operations exceptionally easy. Through its extra large 5.7 touchscreen no keyboard or mouse is required for operation. Exchange of programs to other cyclers or export of data of executed PCR runs are not limited through an USB and LAN port.
Features
- Windows CE based software
- USB and LAN port for easiest data change
- Multilingual Software
- Extra large 5.7 color touchscreen
Technical data
Basic unit
Thermal bloc
Solid sterling silver, gold-plated
Sample capacity
96 SPR block; 96 × 0.2 ml
48 SPR block; 48 × 0.2 ml
36 LPR block; 36 × 20 µl
96 LPR block; 96 × 20 µl
Low-Profile-Rapid blocks (LPR)
Heating rate
15 °C/sec max.
Cooling rate
10 °C/sec max.
Standard-Profile-Rapid blocks (SPR)
Heating rate
12 °C/sec max. (48 SPR) and 8 °C/sec max. (96 SPR)
Cooling rate
8 °C/sec max. (48 SPR) and 6 °C/sec max. (96 SPR)
Temperature control mode
Block Control
(Simulated) Tube Control
Sample block temperature range
4 °C 105 °C
Control accuracy
< ± 0.2 °C at 72 °C
Block homogeneity
< ± 0.3 °C at 72 °C
Lid
Can be heated up to 120 °C
Adjustable contact pressure
User interface
PC via included software
Alternative via HID-Pro 320
Number of programs
Nearly unlimited; 500 on HID-Pro 320
Other technical data
Dimensions (W x H x D)
280 × 290 × 250 mm
Weight
12 kg
Power supply
100 240 V ± 15 % (47 63 Hz)
Power consumption
800 W