HPLC-Systems

Agilent 1100 HPLC SystemAgilent 1100 HPLC System

€18,899.00
Excl. 19% VAT , excl. Shipping Cost
€22,489.81 incl. Vat
ID-number: 61894
Status: LabprocureLabprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen.?
Shipping: 4-6 weeks
Description:
Description. The Agilent 1100 system includes: . 1x Agilent 1100 degasser type G1379A. 2x Agilent 1100 isocracy pump type G1310A. 1x Agilent 1100 variable wavelength detector type G1314A. 1x Agilent 1100 fluorescence detector type G1321A. 2x solvent trays. Manual injection module with a 1 ml sample loop. Notebook. Agilent 1100 IsoPump: . Hydraulic system: Double-railed pump with servo-controlled variable displacement screw drive, free-floating pistons and active inlet valve. Adjustable flow range: 0. 001 - 10 ml/min, in 0. 001 ml/min steps. Flow range: 0. 2 - 10. 0 ml/min. Flow accuracy: < 0. 3% RSD (typically 0. 15%), based on residence time, at 1 mL/min. Pressure: Operating range 0 - 40 MPa (0 - 400 bar, 0 - 5880 psi) up to 5 mL/min, operating range 0 - 20 MPa (0 - 200 bar, 0 - 2950 psi) up to 10 mL/min. Pressure pulsation: < 2% amplitude (typically < 1%), at 1 mL/min isopropanol, at all pressures > 10 bar (147 psi). Compressibility compensation: User selection, based on compressibility of mobile phase. Recommended pH range: 1. 0 - 12. 5, solvents with pH > 2. 3 should not contain stainless steel-attacking acids. Dimensions (H x W x D): 140 x 345 x 435 mm. Weight: 11 kg. Agilent 1100 VWD: . Detection type: double beam photometer. Light source: deuterium lamp. Wavelength range: 190–600 nm. Noise (ASTM): ± 0. 75 x 10-5 AU at 254 nm. Drift: 3 x 10-4 AU/hr at 254 nm. Linearity: > 2 AU (5%) upper limit. Wavelength accuracy: ± 1 nm self-calibration with deuterium lines, verified with the holmium oxide filter. Bandwidth: 6. 5 nm typical. Flow cell: 14-µl volume, 10-mm cell path length, and 40 bar (588 psi) max. pressure. Dimensions (H x W x D): 140 x 345 x 435 mm. Weight: 11 kg. Agilent 1100 FLD: . Detection type: Multi-signal fluorescence detector with fast online scanning capabilities and spectral data analysis. Light source: Xenon flash lamp. Pulse frequency: 296 Hz for single signal mode, 74 Hz for spectral mode. Excitation monochromator: Range; 200 – 700 nm and zero order, bandwidth; 20 nm, monochromator; concave holographic gratings F/1. 6 blaze 300 nm. Emission monochromator: Range; 280 – 900 nm and zero order, bandwidth; 20 nm, monochromator; concave holographic gratings F/1. 6 blaze 400 nm. Spectrum acquisition: Excitation or emission spectra, scan speed; 28 ms per data point, step size; 1 - 20 nm. Wavelength characteristics: Repeatability; ±0. 2 nm, accuracy; ±3 nm. Flow cell: 8 µl volume and 20 bar pressure, quartz. Dimensions (H x W x D): 135 x 345 x 435 mm. Weight: 11. 5 kg
Installation
We execute the installation of this laboratory device professionally. We would be pleased to offer you the installation of this laboratory device for 1120€, excluding travel expenses.

Usually, laboratory and analysis devices are very exigent system with a very own specifications and requirements. Therefore, the startup of a laboratory device often rises the question how to assemble, adjust and to launch it.


We would be pleased to take over the professional installation of your laboratory devices!

Please contact us.


Benefit from the installation by us in more than one way:

  • Immediate and smooth startup of your laboratory device
  • A professional installation extends the lifetime of your laboratory device
  • Guarantee extends to 3 months
  • Freight charges do not apply*
  • You are entitled to benefit from the Labexchange Repurchase Guarantee.

* products of the product groups laboratory furniture and laminar flow are excluded. In individual cases, other product groups can be excluded.


Add to Offer List
More Information
Objektnummer AA00061894
ID-number 61894
Object name Agilent 1100 HPLC SystemAgilent 1100 HPLC System
Status Labprocure Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen.
Manufacture Agilent
Shipping 4-6 weeks

Status, terms of delivery and payment

Verification of devices

The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.

Dispatch time

The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.

As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.

 

Shipping methods

Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.

 

Delivery information

Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.

The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.

 

Terms of payment

We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.

Country

Possible payment methods

Comment

DE, AT, CH

Payment by invoice, payment in advance, paymet by credit card

Payment by invoice is only possible for corporate clients.

NL, BE, LU

Payment by invoice, payment in advance, payment by credit card

Payment by invoice is only possible for corporate clients

Other countries

Payment in advance, payment by credit card

 

 

Our General Terms of Sale, Delivery and Payment are valid and are available for download here. 

The goods are offered subject to prior sale.

 

Definition of status

All articles are used articles, except an article is listed especially as a new device.

Status

Condition

Comment

Immediately available

Used The article is fully functional and in impeccable condition. It can be shipped immediately.
In stock

Used

The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article.

Published

Used

The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery.

New device

new

The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply.

Labprocure

Used

Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen.

Product group: HPLC

Back to Top
part-of-labexchange-group
Search engine powered by ElasticSuite
Smart Deals Smart Deals
Labprocure