Abimed 221 XL
| Objektnummer | B00008074 |
|---|---|
| ID-number | 008074 |
| Object name | Abimed 221 XL |
| Status | Stock unit |
Product group: HPLC-Miscellaneous
Status, terms of delivery and payment
Verification of devices
The second-hand devices are verified by Labexchange Service GmbH before delivery. You are receiving only fully functional devices.
Dispatch time
The stated dispatch times are the shortest possible ones for each article. The effective dispatch times can vary. The effective dispatch times will be stated in the order confirmation.
As a matter of principle, we are offering collective deliveries. The shipping time is calculated based on the position with the longest lead time. A partial delivery is possible on explicit request.
Shipping methods
Parcel services, forwarding agencies, self-pickup, delivery by Labexchange fleet.
Delivery information
Prices exclude shipping costs. Stated shipping costs are to be expected. Deviations are possible. If transport costs are not specified, please ask separately for them.
The stated transport and packing charges apply to the most favorable route if transport and are to be understood as subject to verification due to unexpected cost increases. By reason of unpredictable events, cargo rates and delivery times can change at any time and therefore have to be adapted to the recent situation. Import formalities and possible customs charges will be borne by the purchaser. Incoterm coding according to Incoterms 2010: For persons who collect the devices themselves: EXW, for dipatch by sea: CFR, by air freight: CPT, other shipments: DAP. Note for international shipments: A proof of preference/EUR1 will not be issued by us. When self-collecting/ordering EXW from countries within or outside the European Union, 16% VAT will be retained as a deposit until we have received the corresponding confirmation of arrival/bill of delivery from the buyer.
Terms of payment
We do not accept payment by letter of credit, PayPal, etc. In each case the invoice amount is payable without deduction. Discount is not granted.
|
Country |
Possible payment methods |
Comment |
|
DE, AT, CH |
Payment by invoice, payment in advance, paymet by credit card |
Payment by invoice is only possible for corporate clients. |
|
NL, BE, LU |
Payment by invoice, payment in advance, payment by credit card |
Payment by invoice is only possible for corporate clients |
|
Other countries |
Payment in advance, payment by credit card |
|
Our General Terms of Sale, Delivery and Payment are valid and are available for download here.
The goods are offered subject to prior sale.
Definition of status
All articles are used articles, except an article is listed especially as a new device.
|
Status |
Condition |
Comment |
|
Immediately available |
Used | The article is fully functional and in impeccable condition. It can be shipped immediately. |
| In stock |
Used |
The article is on stock. Our service technicians will verify the article before delivery. You are receiving only a fully functional article. |
|
Published |
Used |
The article is still with the provider. After your order the article will be purchased and verified by us before being shipped to you. A certificate of operativeness as well as a service report are included in delivery. |
|
New device |
new |
The article is brand new and unused. Regarding new equipment the guarantee/warranty conditions of the corresponding manufacturer apply. |
|
Labprocure |
Used |
Labprocure GmbH, as the advertiser, is responsible for the content of this device offer. Labprocure assumes liability for the offers advertised here and for the photos and offer texts included. Labprocure GmbH, Bruckstraße 58, 72393 Burladingen. |
The needle descends into the tube until it reaches the surface of the liquid. When this happens, a signal is sent to the processor. From the moment the processor receives this signal, it starts to calculate the vertical speed required for the needle to follow the liquid level as it changes. The vertical speed of the needle is calculated as a function of the flow rate and the cross sectional area of the tube entered. Once the processor knows the rate at which the level in the vial changes, it can adjust the speed of the needle to remain a constant distance below the level of the liquid.
Specifications
Application: Sample preparation (dilution,serial dilution,addition of reagents and solvents, any liquid transfer from tube to tube, mixing), analyser loader.
Ø HYDRAULICS
Vial capacity : from 120 microvials of 0.3 mL up to 4 bottles of 250 mL. Choice of 25 standard Gilson racks, including 5 thermostated racks, plus special racks, bar which can hold up to 8 transfer ports, and free vessel programing.
Syringe capacity: 0.5, 1, 5 and 10 mL.
Liquid flow rate: From 0.18 to 96 mL/min., continuously.
Liquid-contact materials: 316L stainless steel or titanium, FEP, PTFE, PEEK, PP and PI. Needle gas-supply: Through 3-port valve (additional accessory) for evaporating, degassing and mixing.
Sample cross-contamination: lower than 1 ppm, with liquid level detector and recommended values for rinsing parameters (4 mm immersion, 20 mL/min., 1 mL and 2 mL for needle inside and outside respectively), and lower than 50 ppm without liquid level detection.
Ø MECHANICS
Arm motion speed: 250 mm/s horizontal, 125 mm/s upwards and 90 mm/s downwards.
Needle tip positioning: 0.1 mm reproducibility and 0.2 mm accuracy in each direction.
Ø ELECTRICAL
Remote control: RS-232C and GSIOC.
Inputs: 4 electrical contacts and one analog signal (100 mV), convertible as a 5th contact.
Outputs: 7 electrical contacts including 3 relays, plus two power supplies for 3-port valve and other auxilliary equipment (12 VDC, 500 mA).
Manufacturing standards: Designed to comply with safety standards IEC 10101, UL 1262 and CSA 22.2.151, and with EMC standards IEC 8012-4 for immunity, CISPR 14 and/or CISPR 22 for disturbance.
Ø CONTROL
Gilson Sampler Controller keypad via RS-232C: 8-line, 40-character display, 24 keys, with Gilson 720 keypad software (3.5", double-sided, high-density, 1.44 MB diskette).
Microcomputer via RS-232C or via GSIOC through Gilson 506 interface: 80386 processor, DOS 3.1 or higher, Microsoft Windows 3.1 or higher, 4 MB RAM, with Gilson 719 Manager software (2 diskettes same type as for 720).
Ø PROGRAMS
Automated laboratory tasks available: Add, aliquot, calibrate, dilute, dilute and add, dilute serially, dispense, mix, move arm, pipette, rinse needle, set electrical contact and wait.
Size: Unlimited (more than 1MB available on 720 diskette).
Storage: permanent (for more than 100 programs on 720 diskette).
Ø ENVIRONMENT
Temperature range: from 0 to 40°C.
Maximum relative humidity: 80% at 31°C and 50% at 40°C.
Power requirement: 50 Watts.
Weight: (kg/pound) (including keypad): 12.2/26.84
Dimensions (mm W x D x H): 330 x 465 x 230
